Table of contents
show
Lenofocus 008 Mini Body Camera User Manual
PRECAUTION
- Failure to follow these steps each time may result in damage to your camera, and could possibly destroy your camera. Your warranty does not cover accidental damage or issues caused by user error.
- The camera is not drop resistant, therefore please avoid unnecessary roughness when handling the camera. Try to avoid dropping or damaging the camera in any way.
- Don’t keep the camera in moist circumstances for long periods of time.
- Don’t keep the camera in high temperatures as it may cause damage of external and internal components.
- Use a specialized cloth to clean the camera lens and wipe away fingerprints or dust.
- For the best and most efficient usage of your battery, we suggest using it in 0-40 °C.
- When inserting or removing the micro SD card, please keep the camera turned off to avoid damage of the card or saved files.
- Store the camera in a dry place and remove the micro SD card if storing for long periods of time.
About the SD card
- Please use a Class 10 or higher speed micro SD card.
- Please use genuine brand micro-SD cards. The non-genuine or OEM cards may cause issues, such as the failure of buttons, invalid video/photo issues, turning the camera off during recording, causing the camera to die, and so on.
- This camera supports max 64GB micro SD card.
- Please mind: if micro SD card has problems, it will cause failure to use the camera. And computer can’t recognize the camera as well.
Box contents
- 1x Lenofocus Mini Camera 008
- 1x USB cable
- 1x User manual
- 1x Reset pin
- 1x Cleaning cloth
- Camera Structure
About Charging
- Before using the camera for the first time, please fully charge the camera.
- When charge the camera, please give priority to use the USB cable in the box.
LED Indicator Charging Status
Purple is solid on Charging
Indicator is off Fully charged
- When the purple indicator goes off, please continue to charge the camera for extra 30 minutes to assure it is fully charged. Usually, charging time is 1 to 2 hours.
- If store the camera for long time, you should charge it once every 3 months.
BASIC OPERATION
When using the camera for the first time.
- Insert a micro SD card
- Please insert a micro SD card into camera before operation. Without micro SD card, blue indicator will be solid on for a while and then turn off automatically.
- The camera is compatible with high speed micro SD cards (class 10 or higher).
- Turn the camera on
Long press Power button for 2-3 seconds, blue light will be solid on. Camera enter standby status. - Turn the camera off
Long press Power button to turn the camera of, blue light will off. - Format micro SD card
- Long press Power button to turn the camera on, blue light is solid on.
- Short Press Power button 5 times, green light will flash quickly and go off, then blue light is solid on. Format is finished.
Recording video
- Move Mode switch to Video position.
- Long press Power button to turn the camera on, blue light is solid on.
- Short press Power button to start video recording. Blue light will flash 6 times and then go off.
- When you want to stop video recording, short press Power button again. Blue light will be solid on.
- The video footage is stored as a segment every 5 minutes. You can add all video segments to a player software and play them continuously. If you can’t play recorded files by your computer default media player, please download VLC media player or other media player to have another try.
Recording audio
- Move Mode switch to Audio position.
- Long press Power button to turn the camera on, green light is solid on.
- Short press Power button to start audio recording. Green light will flash 6 times and then go off.
- When you want to stop audio recording, short press Power button again. Green light will be solid on.
- The audio file is stored as a segment every 1 hour.
Reset the camera
- When the camera is on, insert a needle or a pin into the RESET hole and press the reset button inside, the camera will be reset.
- When will you need to reset the camera?
- When the camera doesn’t work properly or it can’t be turned off, you need to reset it.
Set date and time
- Insert a micro SD card into the camera, and connect the camera to your computer.
- Open the SD card and find “SETTIME” document. Open the document and you will find an existing date and time.
- Change the date and time
- Save and exit.
- Remove the camera from your computer and turn it on. And then the changed time will be applied to the camera.
- Note: if you want to show date and time on video, please set correct date and time before your recording.
Camera setting
Factory default setting is 1928x720P, loop recording and no time stamp on video. If you use this setting, you don’t need to change camera settings. If you want to change settings, please do as following:
- Insert a micro SD card into the camera, and connect the camera to your computer.
- Open the SD card, create a .txt document and name it as ‘settings’.
- Open ‘settings’ document, and input numbers according to the following format:
X, Y, Z - When X is 0, it means the video resolution is 1280*720P;
- When X is 1, it means the video resolution is 1920*1080P;
- When Y is 0, the camera will turn LOOP RECORDING off;
- When Y is 1, the camera will turn LOOP RECORDING on;
- When Z is 0, the camera will turn TIME STAMP off;
- When Z is 1, the camera will turn TIME STAMP on.
- Save and exit.
- Remove the camera from your computer and turn it on, it will be set to your desired settings.
- Connecting your camera to a PC
The camera can be connected to a computer and recognized as a mass storage device. You can copy or delete video and audio files directly from your computer. - Charging and recording at the same time
You can charge the camera while it is recording video or audio, and recording won’t be stopped. If you want long time recording, please connect the camera to a power bank or USB adapter.
Specifications
- Video Resolution 1920*1080P, 1280*720P, default setting is 720P
- Video Format AVI
- Audio Format WAV
- Video Encoding M-JPEG
- Video Frame Rate 25fps
- Media Player Popular video player, VLC media player
- Supporting
- System
- Windows XP/7/Vista/8/10;
- Mac OS X 10.4 later; Linux
- Battery Type Lithium polymer battery 450mAh
- Charging Voltage DC5V 500mA
- Interface Type Micro 5 pin USB
- Storage Max 64GB micro SD card
- Charging Time About 1-2 hour
- Video Recording
- Time
- Max 140 minutes
- Dimensions 74x28x25mm
- Camera Weight 24g
Troubleshooting
- If the following problems occur:
- Blue indicator flashes quickly;
- No video/audio recorded;
- Your computer can’t recognize the camera when connect it to your computer.
Solutions:
- Please check if the SD card is good and genuine brand? If the SD card is class 10 or higher speed SD card?
- Please format the SD card;
- If possible, try a new micro SD card and USB cable.
- Please reset the camera.
- If the camera can’t be charged, please try another USB cable and USB charger.
- If the camera doesn’t work properly or can be turned off, please reset it.
- If you can’t play video on computer, please download and install VLC media player and try again.
- More problems, please contact Lenofocus.
REFRENCE LINK
