Califone 1117 7-Port USB Hub User Manual

Califone 1117 7-Port USB Hub User Manual

IMPORTANT SAFETY INSTRUCTIONS

HEED AND ADHERE TO ALL WARNINGS ON THE APPLIANCE AND IN THE OPERATING
INSTRUCTIONS. RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS FOR FUTURE REFERENCE.

WATER & MOISTURE: DO NOT USE THIS APPLIANCE NEAR WATER, I.E., BATHTUB, WASHBOWL, KITCHEN SINK, LAUNDRY TUB, WET BASEMENT OR SWIMMING POOL.

HEAT: SITUATE THE APPLIANCE AWAY FROM HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS,
STOVES OR OTHER APPLIANCES PRODUCE HEAT.

CLEANING: THE APPLIANCE SHOULD BE CLEANED ONLY AS RECOMMENDED BY THE MANUFACTURER

DAMAGE REQUIRING SERVICE: THE APPLIANCE SHOULD BE SERVICED BY QUALIFIED PERSONNEL

1.  OBJECTS HAVE FALLEN OR LIQUID HAS BEEN SPILLED INTO THE APPLIANCE,
2. THE APPLIANCE HAS BEEN EXPOSED TO RAIN,
3. THE APPLIANCE DOES NOT APPEAR TO BE OPERATING NORMALLY OR EXHIBITS A MARKED CHANGE IN PERFORMANCE,

Warranty Registration

Califone warrants this product to be free from defective material and workmanship for one year from the purchase date.

All Damage Claims Must Be Made With The Freight Carrier
Notify the freight carrier immediately if you observe any damage to the shipping carton or product. Repack the unit in the original carton and await inspection by the carrierʼs claim agent. Notify your dealer of the pending freight claim.

System Contents

•  Model 1117 7-port USB Hub (with stand)
•  2.5’ USB cable for connection to a computer
•  User Manual

Specifications and Features

• USB 2.0 and 1.1 compatible
•  7 device ports and one port for computer connection
•  High-speed, Full-speed and Low-speed operation
•  Bus-powered operation:
•  Idle current: ~6 mA
• Operating current: ~250 mA
•  Devices may use up to 1.5 Amps total current
• Self-powered with external power adapter

Setup & Operation

1.  Connect the square (Type “B”) connector of the included USB cable to the USB hub.
2. Connect the flat (Type “A”) connector of the cable to one of the computer’s USB ports.
3. The red power LED should light.  Allow the computer to completely install the device. It should indicate when it has completed.
4.  You may now begin connecting devices to the hub one at a time. Use the 7 USB ports on the USB hub as you would the USB ports on the computer. The computer may automatically detect connected devices or it may require drivers for certain devices. Refer to the instructions that come with those devices for support regarding their installation.

Troubleshooting

USB Hub does not work (Power LED not lit):

•  Check the connection between the computer and hub
• Try connecting the hub to a different USB port on the computer

One or more devices connected to the hub are malfunctioning:

•  Try restarting the computer, or reconnecting the USB hub to the computer

The computer displays an error that the USB bus is drawing too much current:

•  You may need to use an external DC power adapter to power the USB hub. The power adapter should be a
  switching type with a rating of up to 5V/3.5A