Elgato 4K60 2×2 TV Wall Controller User Manual
Introduction
4K60 2×2 tv wall controller
The 2×2 tv wall controller , support 1-way HDMI input and 4 HDMI output, the main function is to divide a complete HDMI,HD image signal into 4 blocks and assign to 4 video display unit (such as Rear projection unit, LCD TV, etc.), Complete with 4 HDMI high-definition video display units to form a large dynamic image screen.
Support modes
Features
- Support 1 HDMI input
- Support input HDMI 2.0
- Support 4 HDMI outputs
- Support input 4K60HZ,and lower resolution
- Support output resolution 1920x1080P60
- Support multiple splicing modes, easy to operate, plug and play
Physical interface diagram
Remote controller
Operation steps
STEP 1: Connect hdmi source to hdmi input with HDMI cable,connect hdmi output to TVs.
STEP 2: Connect 12V power adaptor.
STEP 3: Set up splicing mode by the MODE button on the unit or remote controller.
The Package includes
- 2X2 tv wall controller x1
- Power adapter x1
- User Manual x1
Connection operation
RS232 remote control
This product supports RS232 remote command control and returns the status. Connect the RS232 port of the splicer to the PC COM port by a Rs232 uncrossed cable or USB to RS232 adapter. Then install serial port tools in the PC can use RS232 control.
Parameter configuration of serial port on PC side
Serial port command table:
DOWNLOAD PDF LINK
