Coocaa 70S5G 50 Inch LED TV User Manual
PREPARATION
Unpacking and Installation
- Open the package.
- Take out the TV.
- Install the TV stands.
- Connect the power cord.
Important Safety Instructions
- Keep these instructions – The safety and operating instructions should be retained for future reference.
- Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow all instructions – All operating and use instructions should be followed.
- Do not use this apparatus near water – The appliance should not be used near water or moisture.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as direct sunlight, radiators, heat registers, stoves.
- Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong.
- Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Positioning the TV
- Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
- ALWAYS use furniture that can safely support the television set.
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
Mounting on a Wall
- An optional wall mount can be used with your television. Consult with your local dealer to purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor.
- Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.
- Remove the stand before installing the TV. on a wall mount by performing the stand attachment in reverse.
- If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized wall mount and contact the local dealer or qualified personnel. Otherwise it is not covered by the warranty.
- Do not over tighten the screws as this may cause damage to the TV and void your warranty.
- To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
- Use the screws and wall mounts that meet the following specifications. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
Precautions For Using Remote Control
- Use the remote control by pointing it towards the remote sensor. The items between the remote control and the remote sensor will interfere the normal operation.
- Do not make remote control vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in high humidity place.
- Do not place remote control under direct sunlight which will cause deformation of the unit by heat.
- When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.
- Before Bluetooth searching, please make sure you have turned external Bluetooth devices in the pairing mode. For the Bluetooth remote control supplied with the TV.
Precautions For Using Battery
- Please note the batteries’ polarity, to avoid short circuit.
- When the battery’s voltage is insufficient which affect the use range, you should replace new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
- Do not use different types of batteries together.
- Do not put the battery into fire, and charge or decompose the battery.
- Please dispose of batteries in compliance with relevant environmental protection regulations.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
TERMINAL CONNECTION
AVIN
Receive audio and video signals from AV devices such as DVD.
ANTENNA IN
Connect a coaxial cable to receive signal from the antenna, cable or satellite.
USB
Connect a USB storage device.
HDMI
Receive HD input signal from HDMI devices such as DVD.
DIGITAL AUDIO OUT
Use an optical cable to output your TV’s audio signal to a compatible digital audio receiver.
REMOTE CONTROL
- POWER: Turn the TV on or to standby mode.
- MUTE: Mute or restore the TV sound.
- Number buttons (0-9): Select the channel directly, or input a number
- SOURCE: Select the input source.
- INFO: Access the INFO interface.
- MENU: Access the menu of quick settings.
- HOME: Access the home page.
- Navigation Buttons: Navigate the menu to select the content you need.
- OK: Confirm, enter or execute the selected item, or show the list of Quick Button.
- EXIT: Exit the current operation.
- BACK: Return to upper-level content, or exit the current screen.
- Application Buttons: Access specific applications directly.
- Program Up/Down (P 11/v): Switch channels.
- Volume Up/Down (VOL+/-): Adjust the sound volume.
- GUIDE: Access the EPG interface in DTV mode.
- MIC ( •,, ): Start using the near field voice function.
- ••• USB Play Control Buttons•••
- Play: Start the playback.
- Pause ( II ): Pause the playback.
- Fast Backward ( .- ): Fast backward the playback.
- Fast Forward: Fast forward the playback.
- SUBTITLE: Turn on or turn off the subtitle menu.
- AD: Turn on or turn off the function of audio description.
- Color Buttons (R/G/Y/B): Execute the prompt function in specific mode.
BASIC OPERATION
E-Manual
E-Manual is built into your TV and can be displayed on the screen. To learn more about your TV features, access your E-Manual by referring to the following.
- Press HOME button to access the home page.
- Press and OK button to select and enter “E-Manual” in “Apps”.
TV Control Button
Press Middle:
- In standby mode, press it to turn on the TV.
- In working status,
- Without the source list, short press it to access the source list.
- With the source list, short press it to enter the selected source.
- Long press it to exit the source list or turn the TV to standby mode.
Eye-protection Function
Prolonged exposure to blue light may cause damage to your eyesight. This TV can protect your eyes by filtering the blue light. To enjoy it, please select <MENU -+More-+ Picture-+ Picture Mode_, Movie> & <MENU _,More-+ Picture-+ Color Temperature_, Warm>.
TROUBLE SHOOTING
Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
General Problem / Solution
- Change the batteries.
- Check if batteries are installed correctly.
- Check if main power is connected.
- Check if there are some items between remote sensor and remote control.
- Poor Signal
- This is usually caused by interference from electronic equipment or radio interference sources.
Picture & Sound / Solution
No picture, no sound
Check the signal source. Plug another electrical device into the outlet to check if it is working or turned on. Check if power plug is in good contact with the outlet.
No sound, picture OK
If no sound, unmute the sound or increase the volume. Open the sound menu and adjust ‘Balance’.
Abnormal picture
For no color or bad picture quality, you may:
- Adjust the color option in menu settings.
- Keep the TV at a sufficient distance from other electronic products.
- Try another channel. Bad TV signal (Display mosaic or snowflakes)