Maytronics 8151910 Robot Cleaner User Manual
INTRODUCTION
Thank you for purchasing a Maytronics Robotic Pool Cleaner. We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient, and cost-effective pool cleaning. Its reliable filtration in all pool conditions and active brushing, enhance pool hygiene. Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologies, long-lasting performance, and easy maintenance. You and your family will be free to enjoy your swim with full confidence that your pool is completely clean.
SPECIFICATIONS
- Motor protection: IP 68
- Minimum depth: 0.4 m (1.33 ft)
- Maximum depth: 5 m (16.4 ft)
- Digital Power supply
- Input: 100-125 AC Volts / 200-230 AC Volts50-60 Hertz
- Output: <30 VDC IP 54
WARNINGS AND CAUTIONS
Warnings
- Use the originally supplied power supply only
- Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI)
- Keep the power supply out of standing water
- Position the power supply at least 3.5 m (12 ft) away from the edge of the pool
- Do not enter the pool while the Pool Cleaner is working • Unplug the power supply before servicing
- Keep the Robotic Pool Cleaner out of the reach of children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
POOL CLEANER PARTS
Robotic Pool Cleaner Model Mass 13
Power supply unit
Filtration – options
USING THE POOL CLEANER
Setup
Before using the Pool Cleaner for the first time, perform the following steps:
Putting the Pool Cleaner into the pool
Put the Pool Cleaner into the pool. Release the Pool Cleaner and let it sink to the floor of the pool. Make sure that the floating cable is free of any obstructions.
Turn the power supply ON. The Pool Cleaner will now operate until it has reached the end of the cleaning cycle.
Turn OFF and unplug the power supply.
Using the floating cable, bring the Pool Cleaner to the pool’s edge. Using the handle, remove the Pool Cleaner from the pool.
DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE.
Place the Pool Cleaner on the edge of the pool and let the water drain out.
CLEANING THE FILTER BASKET
Make sure the power supply is switched off and unplugged. It is highly recommended to clean the filter basket after each cleaning cycle. Note: Do not let the filter basket dry out before cleaning.
The Peak Performance
is designed for 21st-century pool owners, our smartest and most advanced robot vacuum is here to deliver a whole new level of pool cleaning. Each model is crafted to provide unrivaled pool cleaning and maintenance, equipped with state-of-the-art water-sensing systems, and backed by the best warranty in the industry. As part of its advanced design, our highest-performing Dolphins also include cloud connectivity via the ‘MyDolphin™ Plus’ mobile app, allowing you to enjoy ultimate cleaning and finishing control anytime, anywhere.
Price
Get the most out of your pool with our affordable, great value Dolphin range. Provides energy-saving, cost-saving operation suitable for in-ground pools (up to 30 feet) and in-ground pools (up to 33 feet). Our most prized Dolphins are light and compact. They contain a top speed filter and are very easy to use and transport, making your pool as empty as possible and your pool time as smooth as possible.
Cleaning after use – removing and cleaning the filter basket]
Periodic cleaning – recommended at least once a month
Dismantle the 2 ultra-fine filter panels of the basket, according to the following steps:
Dismantle the 2 panels using your thumbs.
Clean the filter panels with a hose. Assemble the filter panels.
Insert the clean filter basket and close the filter cover.
CLEANING THE NET CANISTER
CAUTION Make sure the power supply is switched off and unplugged. It is highly recommended to clean the net canister after each cleaning cycle. Note: Do not let the net canister dry out before cleaning.
Cleaning after use – removing and cleaning the net canister
CLEANING THE IMPELLER
If you notice debris trapped in the impeller: Make sure the power supply is switched off and unplugged.
Clean the debris trapped in the impeller opening, according to the following steps:
OFF-SEASON STORAGE
If the Pool Cleaner will not be in use for an extended period of time, perform the following storage steps:
- Make sure that no water is left in the Pool Cleaner
- Thoroughly clean the filter basket and panels/canister and insert them in place
- Roll up the cable so that it has no kinks
- Store the Pool Cleaner in a protected area out of direct sun/rain/frost, at a temperature of between 5°-45°C/41°-113°F.
TROUBLESHOOTING
If the suggested solutions do not solve the problem, please contact your dealer or Service Center.
REFERENCE LINK
https://www.maytronics.com/en-us/
