Table of contents
show
8Bitdo N30 2.4G Wireless Gamepad User Manual
Gamepad Controller
- Plug the receiver to your chosen system, Blue LED blinks once per cycle
- Press start on the controller to pair
- Blue LEDs on both the controller and receiver become solid when connection is successful
Battery
- Status: LED Indicator
- Low battery mode: Red LED blinks
- Battery charging: Red LED stays solid
- Battery fully charged: Red LED turns off
- built-in 180 mAh Li-on with 18 hours of playtime
- rechargeable via USB cable with 1- 2 hour charging time
- Controller turns off in 1 minute with no connection and 15 minutes with connection but no use
Retrieve a lost connection or connect to a new receiver
- Turn on the controller then press and hold select button for 3 seconds. Blue LED starts to rapidly blink 2 – Move the controller close to the receiver. Blue LED becomes solid when connection is successful