HAVIT HV-H913BT Headset with Bluetooth
GET STARTED
Turn on the headset by sliding the on/off button to the “on “side and you will hear “Power on” from your headset
PAIRING YOUR HEADSET
- Slide the power button to “On” side
- Press and hold K1 for 3 seconds until the headset LED light flash red and blue alternatively
- Activate Bluetooth on your phone and scan for new Bluetooth devices.
iPhone Setting Bluetooth on Start searching for devices Android Smartphone settings7wireless Networks Bluetooth On Scan for devices - Select “HV-H913BT”if phone asks for a password or PIN code, enter “0000”
- Once successfully paired .LEDS will stop flashing red and blue
- The LEDS will flash twice once your headset is connected to your mobile phone.
IMPORTANT: If the pairing can’t be completed within 90 seconds while the pairing mode is activated, which means the pairing is unsuccessful, please repeat Step 1 to Step 5 to pair the headset and the mobile phone again.
HV-H913BT support multipoint connection
- After pairing with the first phone, de-activate Bluetooth on your first phone.
- Power off your headset and power on again. Press and hold K1 button until the LEDs flash red and blue
- Activate Bluetooth on your second phone and set it to search for new devices.
- Select “HV-H913BT”, If necessary enter the passkey or PIN code of “0000” (4 Zeroes) and accept the connection.
- Once the second phone is paired and connected, you may re-activate Bluetooth on your first phone and connect to the headset.
How to use it?
Answer/Reject an incoming call
When on the dock:
Pick up the headset and your call will be automatically answered within 5 seconds.
Pick up the headset, press and hold “K1” (the button in the middle) 2 seconds to reject a call.
When off the dock:
Press “K1″once to answer a call, press and hold “K1” 2 seconds to reject a call.
Adjust the volume
Press K2 to increase the volume level
Press K3 to decrease the volume level
Mute the headset
During a conversation, press K2 and K3 button simultaneously and you will hear low tone alert to confirm the headset MIC is in mute status while the microphone is muted, an alert repeats every 10 seconds.
Last call redial
Short press K1 twice to redial the last call listed in the call recants
Voice dialing
Ensure your mobile phone support voice dialing function
- Press and hold K1 for 2 seconds and then tell the phone to dial the name of a stored contact
- Press and hold K1 again to cancel the voice dialing function
STREAM AUDIO
Streaming audio is initiated and controlled using your phone, but when a call rings, the audio automatically pauses to enable you to answer the cal.
Once the call is ended, the streaming audio is resumed.
CONNECT TO SECOND PHONE
- After pairing with the first phone, de-activate Bluetooth on your first phone.
- Power off your headset and -power n again. Press and hold K1 button until the LEDs flash red and blue.
- Activate Bluetooth on your second phone and set it to search for new devices.
- Select “HV-H913BT”. If necessary enter the passkey or PIN code of “0000” (4 Zeroes) and accept the connection.
- Once the second phone is paired and connected, you may re-activate Bluetooth on your first phone and connect to the headset.
LED LIGHT ON HEADSET
Continuous red light indicates charging status, red right will turn to blue when charging is completed.
Blue LED light flashing indicates there is an in-coming call Blue light and red light flashes alternatively indicates paring mode
- Blue LED light lights up for 1 second when turning on
- Red LED light lights up for 1 second when turning off
- Blue LED light on the cradle indicates that the cradle is connected with the charger/computer via USB cable and able to charge the headset
SUPPORT VOICE PROMPT Power on/Power off Pairing/Last number redial/ Connected/ Disconnected/ Voice dial/ Battery low
Product Specifications
- Bluetooth Version 4.0
- Micro USB charging port
- Support HFP, HSP and A2DP
- Connect with two Bluetooth devices at the same time
- Operating Range: Up to 30 feet (10 meters)
- Talk time: 6hours
- Play time: 5.5 hours
- Sleep mode: 100 days
- Standby time on cradle: 23.5 hours
- Charging time: about 2 hours Indicate the battery of the headset in iPhone
FCC NOTE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.