HyperX Pulsefire Haste 2 Gaming Mouse Manual
Overview
- A Left click button
- B Right click button
- C Mouse wheel
- D DPI button
- E Forward button
- F Back button
- G Optical gaming sensor
- H Grip tape
- I Mouse skates
Installation
Connect the USB connector to the computer.
DPI Presets
There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green).
Polling Rate
Switch between 1000Hz (default) and 8000Hz polling rate
- Hold down the DPI Button, while connecting the mouse to a computer
- Continue holding DPI Button for 5s. The LED will blink Red (1000Hz) or Blue (8000Hz)
HyperX NGENUITY Software
To customize lighting, DPI, macro settings, and more, download HyperX NGENUITY software at hyperx.gg/ngenuity.
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual.
Warning:
A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
India RoHS Statement
This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the “India E-waste (Management and Handling) Rule 2016.” It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
Copyright 2022 HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc. in the U.S. and/or other countries. All registered trademarks and trademarks are property of their respective owners.
/ HP Inc. 1501 Page Mill Road, Palo Alto, CA 94304, USA. HP, HQ-TRE, 71025 Boeblingen, Germany. HP Inc UK Ltd, Regulatory Enquiries, Earley West, 300 Thames Valley Park Drive, Reading, RG6 1PT.
FAQS
Q: What are the key features of the HyperX Pulsefire Haste 2?
A: The HyperX Pulsefire Haste 2 gaming mouse features an ultra-lightweight design, weighing just 59 grams. It has a Pixart 3335 sensor with a maximum DPI of 16,000, Omron switches rated for 60 million clicks, six programmable buttons, and customizable RGB lighting.
Q: Is the HyperX Pulsefire Haste 2 suitable for different grip styles?
A: Yes, the HyperX Pulsefire Haste 2 is designed to accommodate various grip styles. It has an ergonomic shape that works well with palm, claw, and fingertip grips, providing comfort and control for different preferences.
Q: Does the HyperX Pulsefire Haste 2 have customizable RGB lighting?
A: Yes, the Pulsefire Haste 2 offers customizable RGB lighting.
Q: What software do I need to customize the HyperX Pulsefire Haste 2?
A: To customize the HyperX Pulsefire Haste 2, you need to use the HyperX Ngenuity software. This software allows you to adjust the DPI settings, assign macros and buttons, customize RGB lighting, and save profiles.
Q: Is the cable on the HyperX Pulsefire Haste 2 flexible and durable?
A: Yes, the HyperX Pulsefire Haste 2 comes with a flexible and durable paracord cable. Paracord cables are known for their lightweight and flexible design, which helps reduce cable drag and provides a smoother gliding experience.
Q: Can I adjust the DPI settings on the HyperX Pulsefire Haste 2?
A: Yes, the Pulsefire Haste 2 allows you to adjust the DPI settings. It features a Pixart 3335 sensor with a maximum DPI of 16,000. Using the Ngenuity software, you can customize the DPI levels and assign them to different profiles or buttons for on-the-fly sensitivity adjustments.
