Insignia NS-DCDCHH2 Dual Camera Dash Cam Manual

Insignia NS-DCDCHH2 Dual Camera Dash Cam

PACKAGE CONTENTS

• Dual Camera Dash Cam
• USB cable
• Vehicle power adapter

FEATURES

• 1080p resolution on front and rear-facing cameras
• G-force sensor automatically starts recording on impact
• Built-in microphone to capture audio
• Loop recording overwrites the oldest footage and prevents you from running out of storage

Refer to the online User Guide for more button information.

Front Back

INSTALLING YOUR DASH CAM

Note: Use a card with 8 GB to 256 GB of memory. We recommend using a card with the highest memory capacity available. Higher memory capacity lets you record more.

1. Insert a microSD memory card (8 GB to 256 GB memory capacity).
2. Clean and thoroughly dry the windshield area where you want to mount your dash cam.
3.  Insert and slide the mounting bracket on the suction cap into themounting slot on the top of your dash cam.
4. Peel the protective film from the mounting bracket and the dash cam lens.
5. Position the suction cup on the windshield, then move the mounting bracket switch clockwise until you hear a click.
6. Connect the provided USB cable to the USB jack on your dash cam, hen thread the cable from your dash cam, around the outer edge of the windshield, and to a 12V vehicle power socket.
   Plug the cable into the vehicle power adapter, then plug the adapter into the power socket and turn on your vehicle. Your dash
   cam starts automatically.
   Note: The first time you insert a new SD card into your dash cam, the screen will prompt you with one of the following error messages if there is an is ue with the card:
   • • CARD ERROR Replace SD Card – indicates that the new card is not available to your dash cam (the card may be incompatible or damaged). Remove the SD card and replace it with another. Only SD cards between 8 and 256 GB should be used.
     OR
   • • CARD ERROR FORMAT Card in Camera – indicates that the formatting on the new card is not compatible with your dash cam. Use the Format tool to format the card. This will delete all of the information on your dash cam, so please save your files first.
7. Rotate the mounting bracket to adjust the viewing angle as needed.
   See your online User Guide for information about dash cam settings.

TURNING ON YOUR DASH CAM MANUALLY

1. Press and hold the power button to turn on your dash cam.
2. Press and hold the power button to turn off your dash cam.

Note: If you have an SD card installed and if your dash cam is connected to a vehicle power socket, it starts recording automatically when you start your vehicle. You should review your first video to make sure that the camera is positioned correctly and that the video recorded correctly.

RECORDING VIDEO WITH YOUR DASH CAM

1. Make sure that your dash cam is turned on.
2. Press the OK button to begin recording.
3. Press the OK button again to stop recording.

TROUBLESHOOTING & SPECIFICATIONS

For troubleshooting and specifications information see your online User Guide.

IMPORTANT SAFETY INSTRUCTIONS

•  Always read the safety instructions and the User Guide carefully. Keep the User Guide for future reference.
• Do not drop or allow forceful impacts to your dash cam, or install it in locations exposed to heavy vibrations.
• Do not disassemble or modify your dash cam in any way. Disassembly or modification may not only void the warranty, but may also cause damage.
• Do not use or store your dash cam in damp locations. Liquid entering your dash cam may cause damage or lead to fires or electric shock.
• Do not operate your dash cam in extreme heat conditions. If your vehicle is parked in a hot sunny climate, let your vehicle cool down before using your dash cam.

LEGAL NOTICES

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  CAN ICES-3(B)/NMB-3(B)

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com

• INSIGNIA is a trademark of Best Buy and its affiliated companies.
• Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
• ©2019 Best Buy. All rights reserved.

Download Link