Insignia NS-PNM6003-BK Wireless Mouse Manual
PACKAGE CONTENTS
- Wireless Optical Mouse
- USB transceiver
- AA battery (1)
- Quick Setup Guide
FEATURES
- Blue sensor for enhanced tracking
INSTALLING THE BATTERY AND REMOVING THE USB TRANSCEIVER
- Take the battery cover off.
- Remove the USB transceiver.
- Insert the included AA battery into the battery compartment. Make sure that the + and – signs match the symbols in the compartment.
- Replace the battery cover.
Tip: Store the USB transceiver in the mouse when it is not in use.
CONNECTING YOUR MOUSE TO YOUR COMPUTER
- Plug the USB transceiver into a USB port on your computer.
- Slide the ON/OFF switch on your mouse to ON. The computer automatically detects the mouse and you can immediately begin using it.
If the mouse does not work:
- Move your mouse closer to your computer.
- Re-plug the USB transceiver into the USB port on your computer, then press the connect button on the mouse. The LED indicator on the mouse flashes steadily while in pairing mode (10 seconds). After pairing successfully, the LED indicator lights solid for 10 seconds, then turn off.
- Check the battery in your mouse. The LED indicator blinks for 10 seconds when the battery is low.
LED INDICATOR
| FUNCTION | DESCRIPTION |
| Power ON | LED is on for 10 seconds, then turns off. |
| Low battery warning | LED blinks for 10 seconds. |
| Pairing | LED blinks for 10 seconds after pressing the Connect button. |
| Pairing failed | After the Connect button is pressed, the LED blinks, then lights solid for 10 seconds. |
| Paired successfully | After the Connect button is pressed, the LED blinks for 10 seconds, then turns off. |
SPECIFICATIONS
Mouse:
- Dimension (L×W×H): 3.89 × 2.44 × 1.44 in. (9.9 × 6.2 × 3.67 cm)
- Weight: 1.86 oz. (.05 kg)
- Battery: 1 AA alkaline battery
- Battery life: 6 months (based on average usage)
- Radiofrequency: 2.4Ghz
- Operating distance: 33 feet (10 meters)
- Rating: 1.5V C.C. – 10mA
USB transceiver:
- Dimension (L×W×H): .7 × .6 × .2 in. (1.8 × 1.4 × .6 cm)
- Weight: 1.2 g ± 0.5g
- Interface: USB 1.1, 2.0, 3.0
TROUBLESHOOTING
My mouse is not working.
- Move your mouse and computer closer together.
- Make sure that your computer meets the system requirements.
- Only use the mouse on a clean, flat, non-slippery surface to ensure smooth and accurate cursor action.
- If your mouse stops working:
- Make sure that your mouse and USB transceiver are paired by pressing the connect button on the mouse.
- Replace the mouse battery.
- Try connecting your USB transceiver to a different USB port on your computer.
- Avoid using your mouse on reflective, transparent, or metallic surfaces.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Consult the dealer or an experienced radio/TV technician for help.
ONE-YEAR LIMITED WARRANTY
For a complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2015 Best Buy. All rights reserved. Made in China
REFERENCE LINK
https://www.insigniaproducts.com/pdp/NS-PNM5003-BK/3491003
