SNAILAX SL-581 Shiatsu Foot Massager manual

SNAILAX SL-581 Shiatsu Foot Massager

Instruction

Thank you for purchasing Shiatsu foot massager with air pressure & heat by Snailax Corporation. With normal care and proper treatment, it will provide years of reliable service.
Please read all instructions carefully before using this product.
Please retain this manual for future reference.

FEATURES

• Shiatsu, rolling massage on sole of the foot
• Scraping massage on the heel
• Double air compression massage on insteps and ankles
• 3 selective intensity of air compression
• 3 different Modes are available, combined with air compression, rolling, and heat in different ways
• With optional heat function for insteps
• Detachable and washable foot sleeve

CONTENTS

• SL-581 Shiatsu foot massage with air pressure & heat
• 24V UL approval home adapter

TECHNICAL DATA

• Measurements: 18.1 x 10.6 x 11.4 inches
• Weight: 11lbs
• Voltage:
  • Input: AC 100-240V ~50/60Hz
  • Output: 24VDC 1500mA
• Nominal Power: max. 36 Watt
• Automatic runtime: 15 minutes

Setup and Operation

1. Please put the product on the flat floor.
2. Connect the adapter cable to the corresponding port on the foot massager.
3. Plug the home adapter into electrical outlet ( the adapter is safe to use with both 110-120V & 220-240V )
4. Turn on the massage device through operating control panel.

WARRNING

• Before plug ,please check and make sure the power cord is undamaged.
• Do not use the wet hand to plug in the adapter.
• Please don’t use the product by standing posture or put any heavy object on the product to avoid any broken caused.
• Please don’t stand or seat on the product .
• When moving the product, please don’t pull the power cord or drag the product directly to avoid any damaged caused.
• Please don’t let children and pets play the products for preventing any accident happened.
• Do not use the wet hand to pull out the power cord in order to avoid any electric shock.
• Do not use this product in damp environment to avoid electric shock.

Safety Instructions

Please read the following instructions carefully before putting your massage device into use to ensure trouble-free operation and optimum efficiency. Please retain these instructions for further reference!

• The device conforms to recognized technical principles and the latest safety regulations.
• This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on, or near children or disabled persons. Do not allow children to play with product .
• Do not allow more than one person to use this product at a time.
• The device should never be left unattended when plugged in.
• Never use any power sources other than UL standard home adapter provided as original equipment with this massage device.
• Any possible repairs may only be carried out by authorized expert staff. Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.

We recommend that those with any of the following conditions consult a doctor before using this massage device.

1. Those who are using electronic medical instrument imbedded in the body , such as cardiac, pacemaker etc.
2. Those who are being treated by doctors ,especially those who feel uncomfortable.
3. Those who are malignant tumor patients ,heart disease patients, acute patients.
4. Women who are pregnant or menstruating.
5. Those with osteoporosis or fracture spine.
6. Those with skin disease or those whose skins reinjured.
7. Those whose body temperature is over 38 degrees(Febrile Phase).

Controller Instructions

• Please choose a chair with desired height and be seated, then put your feet into the product ( see right picture). Operate below control panel to get foot massages.

Power Button Press to turn on the massager, the indicator light turns red. The massager automatically activate the default settings i.e. the massager works on Mode 1 and on Low intensity. Press again to turn off the massager.

Mode button Press to change the Mode between Mode 1 to Mode 3. Mode 1 –Indicator light turns red Mode 2 –Indicator light turns blue Mode 3 –Indicator light turns blue & red

Heat Button Press to activate the Heat function, the indicator light turns red. Press again to turn off the Heat

Intensity Button for Air pressure Press to choose Low, Medium or High intensity of air pressure. Low intensity — Indicator light turns blue Medium intensity — Indicator light turns red High intensity –Indicator light turns blue & red

Cleaning & Maintenance Instructions

• Before cleanig, make sure the power supply is turned off and the plug has been pulled out from the socket.
• It is forbidden to dip the whole product in water or other liquid when cleaning.
• Use a soft cloth to wipe the surface of the product and controller.
• Use a piece of cloth that has been dipped with cleaning agents to wipe the main unit of the foot Massager, and then use a piece of dry and soft cloth to wipe it.
• Do not pull the power plug by damp hands.
• Do not use water washing product ,do not spray the water or other liquids to the interior of the product.
• Do not use corrosive cleaning agents like benzene or thinner to clean the Foot Massager , otherwise ,the color of upholstery will fade or the Foot Massager will crack or be eroded.
• Do not iron the upholstery.
• When product is wet ,do not detach the cloth cover, let the product dry naturally.

Maintenance

• Make sure the power supply is turned off and the plug has been pulled out from the socket.
• Sweep off the dust . Keep the foot massager clean and away from damp places.
• Store the massager in a cool, dry place out of reach of children.
• Avoid contact with sharp edges or pointed objects which might cut or puncture the cover of massager.

TROUBLESHOOTING GUIDE

WARRANTY

If you have any issue about the product, please feel free to contact us by sending email to support@snailax.com We will strive to provide the best service possible within 24 hours.

30 days unconditionally Return
Snailax product can be returned to receive a full refund for any reason within 30 days. Please contact our customers service (support@snailax.com), our staff will contact you within 24 hours.

90 days refund/replace
Snailax product can be returned / replaced within 90 days if the product break down in the period of proper use.

12 months Warranty
If the product break down within 12 months in the period of proper use, customers can enjoy the relevant warranty to get them replaced.

Attention!
No warranty will be given to any force majeure and man-made causes to a defectives product, such as improper care, personal tear down and willful damage, etc.

Contact Us

If you have any questions regarding our products or services, please feel free to send us an email anytime to support@snailax.com, our customer service team will reply you within 24 hours.

1687 Plymouth Rd, Unit C, Ann Arbor, MI, 48105 U.S.A support@snailax.com www.snailax.com

REFRANCES

www.snailax.com

https://cdn.shopify.com/s/files/1/2502/3672/files/SL581_user_manual8.1-1.pdf?7691