SNAILAX SL-594 Foot Massager manual
Safety Instructions
Please read the following instructions carefully before putting your massage device into use to ensure trouble-free operation and optimum efficiency. Please retain these instructions for further reference!
- The device conforms to recognized technical principles and the latest safety regulations.
- This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on, or near children or disabled persons. Do not allow children to play with product .
- Do not allow more than one person to use this product at a me.
- The device should never be left unattended when plugged in.
- Never use any power sources other than UL standard home adapter provided as original equipment with this massage device.
- Any possible repairs may only be carried out by authorized expert staff. Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
- Please avoid contact of the device with water, high temperatures and direct sunlight.
- Do not damage ,process ,excessively bend ,pull hard ,twist or knot power cord.
- Do not use any damaged cables, plugs or loose sockets.
- Do not use the product when the power cord is damaged.
- In case of malfunction, disconnect immediately from the mains.
- Misuse or incorrect use excludes any liability for damage.
- Do not use while you sleep.
- In order to avoid excessively stimulating the muscles and nerves, the recommended massage me should not be exceeded 15 minutes at a me.
- Do not use this product for medical treatment.
- People who are insensitive to heat must be accompanied by normal person when using this massage device.
Instruction
Thank you for purchasing Snailax Massager. With normal care and proper treatment, it will provide years of reliable service. Please read all instructions carefully before using this product. Please retain this manual for future reference.
Product Parts
Configuration Figure of Functions
- On/Off Button: ON/OFF
- Mode Button : (2 modes for options)
- Heat Button: (Low / High)
- Speed Button: (Low / High)
Operations for Use
After the unit is powered on, the whole machine enters the standby state. The detailed functions of each control button are as follows
Power Button
Press to turn on the machine, the ‘rolling & scraping’‘ vibration’ and ‘heating’ functions are turned on. The lights on the control buttons light up. The initial state of the boot runs in ‘Mode I’ and ‘low speed’, ‘high heating’. 15 minutes automatic timing, after running for 15 minutes, the massager will automatically shut down; Press this button again to shut down.
Mode Button
Press this button to switch the massage modes.
- Mode I: The rolling, scraping and vibration functions are running simultaneously, the Mode button lights up green.
- Mode II: Only vibration massage, the Mode button lights up red.
Heat Button
Press this button to cycle low/high/off settings of heating function.
- Low Level: The heat button lights up green
- High Level: The heat button lights up red.
Trouble shooting
| Fault | Solutions |
| There is a clatering noise in the movement | This is perfectly normal caused by the working of product. It is normal status. |
| The massage device switches off suddenly | Device may have been in use for 15minutes. Auto-shut off func�on ac�vated. Con�nue using by pressing the ‘power’ bu�on a�er res�ng the unit for 15minutes. |
|
The massage device fails to start | Check if device has been used for more than 15 mins. If so, let device rest for 15 mins before continuing. Device may require longer �me to cool in warmer environments. |
| Check if adapter is plugged into socket. | |
| Check if adapter output is connected to device power inlet. |
Warranty
If you have any issue about the product, please feel free to contact us by sending email to support@snailax.com We will strive to provide the best service possible within 24 hours.
30 days unconditionally Return
Snailax product can be returned to receive a full refund for any reason within 30 days. Please contact our customers service (support@snailax.com), our staff will contact you within 24 hours.
90 days refund/replace
Snailax product can be returned / replaced within 90 days if the product break down in the period of proper use.
12 months Warranty
If the product break down within 12 months in the period of proper use, customers can enjoy the
relevant warranty to get them replaced.
Attention!
No warranty will be given to any force majeure and man-made causes to a defective product, such as improper care, personal tear down and willful damage,etc.
Extend Warranty for Free
Enter the following URL or scan the QR code below to find Snailax facebook page and like it, enter“Warranty” to messenger to extend your warranty from 1 year to 3 years.
https://www.facebook.com/snailax
Send message“Warranty” and email us support@snailax.com to extend your warranty from 1 year to 3 years.
FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
REFERENCE
https://cdn.shopify.com/s/files/1/2502/3672/files/SL-591_user_manual_2022.07.07.pdf?v=1664349068
