Table of contents
show
Cuisinart CSG-466 Probe Thermometer
Main functions
- 4 function buttons: ON/OFF, °F/°C, HOLD, LIGHT
- LED light
- Memory functions for max/min temperature.
- Temperature measurement range: -40°C~+250°C or -104°F~+482 °F
- Default temperature setting:°F
- Measurement period: 1second, temperature resolution: 0.1°F
- Low power detection
- LED Backlight
Start & Reset
- Remove the silicone shield to access the battery door on the back of the thermometer. Slide the door away to install batteries.
- AAA – not included
- Power the thermometer on after the batteries are installed, all functions will show on the display for 1 second, and start to measure the environment’s temperature. Also, the LED background light on for 5 seconds.
- Default temperature setting: °F (see Figure 1)
Operations
3.1.1 ON/OFF button
- Press the ON/OFF button one time to power on. Press the ON/OFF button one time to power off. 3.1.2 °F/°C button
- Press this button one time to exchange °F/°C.
- After exchange, the degree will not be reserved, it will show °F when you power on again. 3.1.3 HOLD button
- Press this button to show the max tested temperature, press again to show the min tested temperature. press once more back to the current temperature. When showing max/min temperature, if there is no operation within 5 seconds, it will go back to the testing position automatically. 3.1.4 LIGHT button
- Press this button to turn on the LED light, press again to turn off the LED light.
Function description
4.1.1Temperature
- Temperature measurement range: -40°C~+250°C or -104°F~+482°F
- Measure period: 1 second, temperature resolution:0.1°F
- Default temperature setting: °F
- Accuracy:+/-1
- It shows “HI”when the tested temperature over the MAX temperature, it shows “LO” when the tested temperature below the MIN temperature.
- 4.1.3 Backlight function
- Push the °F/°C or “HOLD” button once, the LED lights on for 5 seconds. When power on, it lights on for 5 seconds.
Download Link
