Cuisinart OT1500GF Induction Cooktop User Guide

Cuisinart OT1500GF Induction Cooktop User Guide

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

1. READ ALL INSTRUCTIONS.
2. Unplug from the outlet when not in use and before cleaning. Allow the surface to cool before putting on or taking off parts.
3. Use the unit only on a level surface.
4. Use only with induction-compatible cookware.
5. Dry outside of pan before use.
6. Do not heat the empty pan.
7. Don’t spill any liquids into vent areas.
8. To protect against electrical shock, do not immerse the cord, plugs, or housing unit in water or other liquids.
9. This appliance should not be used by or near children or individuals with certain disabilities.
10. Do not leave the appliance unattended when it is on.
11. Do not touch hot surfaces.
12. Do not cook on a broken cooktop – If the cooktop is broken, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock.
13. Clean cooktop with caution – If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.
14. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been damaged in any manner. Call the nearest authorized Cuisinart consumer service center (see Warranty) to return for examination, repair, or adjustment.

PACEMAKER WARNING:
Persons with a pacemaker or similar medical device should exercise caution when using or standing near an induction unit while it is in operation. The electromagnetic field may affect the working of the pacemaker or similar medical device. It is advisable to consult your doctor or the pacemaker manufacturer about your particular situation.

GROUNDING INSTRUCTIONS

For your protection, Goodful™ by Cuisinart® One Top® Smart Induction Cooktops are equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug and should be used in combination with a properly connected grounding-type outlet as shown in Figure 1. If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be obtained so that a 2-slot wall outlet can be used with a 3-prong plug. Referring to Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded.

IN THE BOX

• Goodful™ by Cuisinart® One Top®
• Smart Induction Cooktop
• User Guide
• Quick Start Guide
• Temperature probe
• Temperature probe clip
• Specs
• Power draw: 120v AC / 12.5 A
• Output: 100 – 1500 Watts
• Power levels: 1–10
• Temperature range: 80° F – 430° F
• Weight: 6 lb.
• Dimensions: 13.5 in. x 13.75 in. x 3 in.
• Cord length: 43 in. +/- 2 in.
• Connectivity: Bluetooth® LE 4.0
• Power control: Capacitive touch / App
• connectivity
• App platform: iOS®/Android
• Control app: One Top

PARTS & FEATURES

1. Engineered crystal glass surface
2. Integrated surface sensor – tracks the surface temperature of your pots and pans
3. Thermometer probe – tracks the
   the temperature of liquids, meats, and fish
4. Temperature probe clip
5. Capacitive touch power control buttons
6.  Pentagon Shape

USING ONE TOP®
CONNECTING TO THE ONE TOP™ APP One Top® connects to the One Top™ app via Bluetooth®, allowing it to receive cooking time and temperature instructions. Without the One Top™ app, you can still control One Top with the buttons on the front. Download the One Top™ app to your mobile device from the iTunes® App Store or GooglePlay for Android.

To connect to the app:

1. Plug One Top® into a 120vac 60Hz socket. Open the One Top™ app on your mobile device.
2. Tap Connect to One Top® at the bottom of the screen.
3. Bluetooth pairing will initiate. In the message that appears, tap Pair to confirm.
4. The 10th (far right) LED light on One Top® will be solid blue when successfully paired.
5. Tap the bar at the bottom of the screen to begin using One Top with the app, or choose a recipe from the list and follow the prompts.
6. To reconnect each time you open the One Top™ app, tap the bar at the bottom of the screen. If One Top® is not connecting to the One Top™ app via Bluetooth, reset the Bluetooth connection by touching the buttons on One Top® simultaneously until it chimes.
7. To connect a different mobile device, open the Bluetooth settings on the connected mobile device and disconnect it from there. Then connect the new mobile device using the steps above.
8. To connect a different cooktop, open the Bluetooth settings on the connected mobile device. Tap the Info ( i ) symbol next to One Top™ App, then tap Forget This Device. Connect to the new cooktop using the steps above.

COOKING MODES

The One Top® has three cooking modes, allowing almost any type of cooking.

Basic
In Basic mode, One Top® acts like a standard induction burner. Use controls directly on the One Top® to adjust the power level from 1–10 (much like a standard cooktop), or enter specific target temperatures in the app. In either case, the current probe and surface temperature readings are displayed in the app, if connected.

Sous
Vide In Sous Vide mode, Cook Top works with the One Top™app to precisely control the temperature of the water to achieve a perfectly cooked dish. The power level automatically adjusts to maintain your desired temperature. You can also use Sous Vide mode for poaching or slow cooking.

USING BASIC MODE

To cook in Basic mode using the controls directly on One Top:

1. Tap the button on Cook. Continue tapping the buttons to set desired power level from 1–10, then tap the Power button on Cook to start cooking.
2. While cooking, the current probe and surface temperature readings are displayed in the app.
3. When finished cooking, tap the Power button on One Top to turn it off.

To cook in Basic mode using controls in the One Top™ app:

1. Connect One Top® to the app, then tap Start Cooking. A screen displays options including a basic timer, probe and surface temperature settings, and buttons which 7 mimic the function of the buttons on the Cook Top.
2. To set a specific target temperature, tap Set Temp to the right of either the probe or surface temperature reading, then enter a target temperature and tap Set Temp again. You’ll be prompted to tap the Power button on One Top® to start cooking.
3. Once the target temperature is reached, it will be maintained until adjusted or canceled.
4. When finished cooking, tap the Power button on One Top® to turn it off, or tap the power button at the bottom of the screen.
5. In Basic mode, the timer is simply a countdown timer. Tap Set to choose a duration and Start Timer to start the countdown. You’ll be notified when the time is up.

COOKING POWER LEVELS

SAFETY FEATURE: If the power level is set to 10, One Top will run for 30 minutes. After 30 minutes, One Top® blinks all LEDs and sounds every 5 seconds for 1 minute. During the 1-minute warning period, tap the Power button to continue cooking. If you do not touch the Power button during the 1-minute warning period, the power level drops to 6. Touching the Power button after the power level drops to 6 turns One Top off.

USING SOUS VIDE MODE
Sous Vide mode requires the One Top™ app and temperature probe.

To cook in Sous Vide mode:

1. Plug the temperature probe into One Top® and attach the probe to the side of the pot using the included probe clip. At least 1.5 inches of the probe must remain submerged for accurate readings.
2. Open the One Top™ app and tap the bar at the bottom of the screen.
3. connect your One Top in order to start cooking.
4. Tap Sous Vide at the top of the screen.
5. Enter your goal water temperature using the keypad, then tap Set goal temperature.
6. Enter your desired cooking time using the hour and minute selector, then tap Start heating water. You’ll be prompted to tap the Power button on One Top® to start cooking.
7. Once the desired water temperature is reached, the timer will begin its countdown, notifying you when your dish is perfectly cooked.
8. To cancel Sous Vide mode at any time, tap the Power button on One Top® to turn it off, or tap the power button at the bottom of the screen.

SAFETY FEATURE: For high-temperature control–where the target temperature setting is above 214 °F–One Top will run for 45 minutes. After 45 minutes, One Top blinks all LEDs and sounds every 5 seconds for 1 minute. During the 1-minute warning period, touch the Power button to continue cooking. One Top will automatically adjust power to maintain the desired temperature. If you do not touch the Power button during the 1-minute warning period, One Top automatically turns off.

CLEANING

CLEANING THE TEMPERATURE PROBE WARNING:
The temperature probe may be hot to the touch. Allow the temperature probe to cool before cleaning. To clean, wipe the probe with a damp cloth or sponge and use mild soap. Do not put the probe in the dishwasher or immerse it in water. Make sure the probe connector is completely dry before plugging it into the One Top® unit.

DAMAGE FROM SUGARY SPILLS AND MELTED PLASTIC

Take special care when removing hot substances from One Top® to avoid permanent damage to the glass surface. Unless removed while still hot, sugary spillovers (such as jellies, fudge, candy, and syrups) or melted plastics can cause pitting of the surface of your One Top® (not covered by warranty). When cleaning, be sure to use a new, sharp razor scraper. Do not use a dull or nicked blade.

CLEANING THE COOKTOP GLASS WARNING:
Do not touch hot surfaces. Turn Cook Top off and allow it to cool before cleaning. To clean, wipe the cooktop glass with a damp cloth or sponge and use mild soap. You can also use ceramic cooktop cleaner and follow the instructions on the packaging.

To clean sugary spills and melted plastic:

1. Remove the pot or pan. Turn One Top® off. WARNING: Do not touch hot surfaces. While wearing an oven mitt: a. Use a single-edge razor blade scraper to move the spill to a cool area on the cooktop. b. Remove the spill with paper towels.
2. Leave any remaining spillover on the surface until the cooktop is cool.
3. Do not use One Top® again until you remove all of the residues completely.

TROUBLESHOOTING

LED ERROR GUIDE

1. (far left) LED flashing: Internal cooktop failure – Contact goodfulonetopsupport@ cuisinart.com
2. LED flashing: IGBT sensor error – Contact goodfulonetopsupport@cuisinart. com
3. LED flashing: IGBT over temperature protection – One Top® has turned off to avoid burning your cookware. Allow One Top® to cool and try again.
4. LED flashing: Empty pot or pan detected on the cooktop – One Top® has turned off to avoid burning your cookware. Allow Cook Top to cool and try again.
5. LED flashing: Under/over voltage – One Top® only works with U.S. outlets. Try plugging it into another outlet or contact goodfulonetopsupport@cuisinart.com
6. LED flashing: No pot detected on the cooktop – Place an induction-compatible pot or pan on the cooktop.
7. LED flashing: Surface thermistor failed or not connected – Contact goodfulonetopsupport@cuisinart.com 8. 10th (far right) LED flashing: Wired probe not connected – Plug the thermometer probe completely into the cooktop.

BLUETOOTH® CONNECTION ISSUES
If One Top® is not connecting to the One Top app via Bluetooth, reset the Bluetooth connection by touching the buttons on One Top® simultaneously until it chimes. If that does not fix the connection, open the Bluetooth settings on the connected mobile device. Tap the Info ( i ) symbol next to Goodful One Top, then tap Forget This Device. Reconnect to One Top using the steps in the Connecting to the Goodful App section.

COOKING NOISE
Different types of cookware may produce cooking noise. Heavier pans, like enameled cast iron, produce less noise than lighter pans, like multi-ply stainless steel. The size of the cookware and the amount of its contents can also contribute to the sound level. The cooling fan may emit a “humming” noise when it turns on to cool the induction elements. The cooling fan turns on shortly after cooking starts. Depending on the type of cookware you use, there may be a slight “buzz” when cooking at high power levels, or if the pan’s contents are cold. As the cookware heats or you reduce the power level, the sound will decrease.

LIMITED 12-MONTH WARRANTY

This warranty is available to U.S. consumers only. This warranty supersedes all previous warranties on the Goodful™ by Cuisinart® One Top® Smart Induction Cooktop. You are a consumer if you own a Goodful™ by Cuisinart® One Top® Smart Induction Cooktop that was purchased at retail for personal, family, or household use. Except as otherwise required under applicable state law, this warranty is not available to retailers or other commercial purchasers or owners.

We warrant that your Goodful™ by Cuisinart® One Top® Smart Induction Cooktop will be free of defects in material or workmanship under normal home use for three years from the date of original purchase. We recommend that you visit our website, www. cuisinart.com for the fastest, most efficient way to complete your product registration. However, product registration online does not eliminate the need for the consumer to maintain the original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture. If your blender should prove to be defective within the warranty period, we will repair it or, if we think it necessary, replace it.

To obtain warranty service, please call our Consumer Service Center toll-free at 1-800-726-0190 or write to Cuisinart, 7475 North Glen Harbor Blvd., Glendale, AZ 85307. To facilitate the speed and accuracy of your return, please enclose $10.00 for shipping and handling of the product. Be sure to include a return address, daytime phone number, description of the product defect, product serial number (stamped on the bottom of the product base), and any other information pertinent to the product’s return. Please pay by check or money order made payable to Cuisinart. (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions.)

REFERENCE LINK

https://www.cuisinart.com/shopping/discontinued/discontinued-goodful-by-cuisinart/ot1500gf/

DOWNLOAD LINK

Cuisinart OT1500GF Induction Cooktop User Guide