Shark SV75_N 14 Cordless Hand Vacuum User Manual

Shark SV75-N 14 Cordless Hand Vacuum User Manual

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS HAND VACUUM When using your hand vacuum, basic safety precautions should always be followed,including the following:
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. DO NOT use, charge or store the hand vacuum outdoors or on wet surfaces. Store the cordless vacuum indoors. Put vacuum away after use to prevent accidents.
2.  Use only as described in this manual.
3. DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. DO NOT leave vacuum unattended while in use.
4.  DO NOT handle plug, charger or appliance with wet hands.
5. Fully assemble hand vacuum before operating. DO NOT use hand vacuum cleaner without dust cup filter in place. Use only on dry, indoor surfaces.
6. DO NOT use charger with an extension cord. Plug charger directly into an electrical outlet. Use charger only in a standard electrical outlet.
7.  DO NOT attempt to use the charger with any other product nor attempt to charge this product with another charger. Use only the charger model ZD6W210024US supplied with this appliance.
8.  DO NOT use charger with damaged cord or plug. If charger or hand vacuum has been dropped,damaged, left outdoors, or dropped in water, return it to EURO-PRO Operating LLC for examination,repair or adjustment.
9.  DO NOT abuse the charger cord, pull cord around sharp edges or corners or close door on cord.Never carry the charger by the cord or yank to disconnect from an outlet; instead grasp the plug and pull to disconnect. Keep charger cord away from heated surfaces.
10.  Use only manufacturer’s recommended attachments. Always turn off this appliance before connecting or disconnecting the motorized nozzle. DO NOT attempt to change accessories while unit is running.

FEATURES

1. Air-Intake Nozzle
2. Dust Cup Container
3. Dust Cup Filter
4.  Dust Cup Release Button
5. Charging Indicator Light
6. On/Off Switch
7. Motor Housing
8. Charging Adapter
9. Motorized Brush
10.  Crevice Tool

TWO YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of two (2) years from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes.This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit.

CHARGING YOUR HAND VACUUM

1.  Before first using the hand vacuum, make sure that the On/Off switch is in the “Off”position and charge until indicator light turns OFF, max. 6 hours.
2.  Connect the charging jack to the charging hole that is on the back of the vacuum.
3. Plug the charger into the wall outlet. The charging indicator light will illuminate to show that the vacuum is being charged.
4. After first use, discharge the unit fully and then recharge until indicator light turns OFF,max. 6 hours.

MAXIMIZING THE LIFE OF YOUR NI-MH BATTERY

1. Do not store in areas of high temperature or humidity.
2.  Use only the charger supplied with the product. If other chargers are used, the batteries can fail causing damage to the battery, product or personal property.
3.  After 3 months of non-use, the product should be fully discharged and then rechargedto maximize battery power.
4.  If the product has never been used or has been stored for an extended period of time without use – it will take several complete charge and discharge cycles to realize the full operational time of your product.
5.  Ni-MH batteries have a long useful life but at some time they will need to be replaced.To purchase replacement batteries, visit www.sharkclean.com

ASSEMBLY OF THE HAND VACUUM

IMPORTANT: The dust cup filter must always be used when operating the hand vacuum.

1.  Push the dust cup release button and remove the dust cup.
2.  Verify that the dust cup filter is inside, then reattach the dust cup to the hand vacuum.
3.  The motorized brush can be used to vacuum short pile carpets or rugs. To attach the motorized brush, make sure the On/Off switch is in the Off position. Then firmly insert the motorized brush into the air-intake nozzle, ensuring that the contact pins are engaged in the connector slots of the unit.
   WARNING: Do not touch the motorized brush while it is in motion.
4.  The crevice tool can be used to clean narrow, hard to reach places. To attach the
   crevice tool, push the attachment into the air-intake nozzle.

USING THE CORDLESS VACUUM

CAUTION: The air-intake nozzle and attachments must be free of obstructions at all times, otherwise the motor will overheat and could become damaged.

1.  To start the vacuum, push the “On/Off” switch to the “On” position.
2.  To turn the vacuum “Off”, push the “On/Off” switch to the “Off” position

CHANGING & CLEANING THE DUST CUP FILTER

NOTE: It is recommended that the dust cup filter be replaced every 6 – 9 months to ensure peak performance of the vacuum.

1.  Press the dust cup release button and pull out the dust cup.
2.  Carefully remove the dust cup filter and empty the dust from the dust cup.
3.  Rinse the dust cup filter in cold water and let it dry completely before replacing back into the dust cup. Do not wash it in a washing machine or use a hair dryer to dry it.

 BATTERY PACK REPLACEMENT & DISPOSAL

The cordless hand vacuum is powered by Ni-MH batteries, which must be recycled or disposed of properly in accordance with state, federal and local laws. If uncertain as to how to remove the battery pack, we suggest that you take your hand vacuum to are put able small appliance service technician to have this service performed. Do not attempt to replace the batteries used in this product with any other type of battery. Follow these steps when replacement of the battery pack is required:

1.  Using a #1 Phillips head screwdriver, remove the single screw securing the battery compartment cover located underneath the unit.
2.  To remove the cover, lift up the battery compartment cover. Never open the battery compartment except to replace the battery pack. Set the cover and the screw aside.
3.  Slide the battery strap over and lift it out.
4.  Carefully lift out the top battery pack and disconnect the terminals.

WARNING: Never use ordinary batteries for replacement as these may leak and damage your vacuum cleaner. Use only the battery pack XB75N provided by EURO-PRO Operating LLC for replacement. Call customer service at 1 (800) 798-7398 or visit our web site at www.sharkclean.com to order replacement battery packs.
CAUTION:

•  Use only with battery pack supplied.
•  Do not attempt to remove the battery pack from the unit to charge.
•  Never throw the battery pack or the appliance into a fire or incinerate it.
• Do not remove or damage the battery casing.
• Do not place the batteries on metal surfaces.
• Do not touch metal parts of the batteries together as the batteries will overheat.

TROUBLE SHOOTING

DOWNLOAD PDF

lhttp://Shark SV75_N 14 Cordless Hand Vacuum User Manual

REFERENCE LINK

www.sharkclean.com