Avantek Indoor HDTV Antenna User Manual
Product Introduction
This indoor antenna brings you access to free over-the-air TV broad- cast channels digital terrestrial television or digital video broadcasting in full 1080p. Please follow the guidelines in this instruction manual for the best product performance and user experience.
Specifications
| Antenna Dimensions | 13.1 x 12.2 in (33 x 31 cm) |
| Frequency Coverage
| VHF 40-230 MHz UHF 470-860 MHz |
| Gain | VHF: 25 dB, UHF: 20 dB |
| Impedance | 75 Ω |
| Operating Temperature | -45 – 185 °F (-40 – 85 °C) |
| Coaxial Cable Length | 10 ft (3 m) |
Installation and Setup
- Connect the antenna to the connecting box, as shown .
- Connect the connecting box to the ANT/IN port on the TV or STB set-top box.
- Connect the connecting box to a power outlet using the AC.
- Place the antenna in a desired position. You may hang it on the wall or window, or lay it on any flat.
- Turn on your TV, and select the “Antenna Mode” or “Air Mode” in the setup menu. Refer to the manual of your TV for further instructions.
- Set the TV to scan for channels in the setup This function may be listed as auto-program, auto-scan, channel search or channel scan. Refer to the manual of your TV for further instructions.
- Please note that network availability may vary significantly based on your geographical location. A list of all possibly available channels in your area may be obtained from the local.
| User Location | Website(s) That May Be Useful |
| US | http://dtv.gov/maps |
| UK | http://www.dtg.org.uk/work/coverage.htmlhttp://www.freeview.co.uk/availability |
| Germany | http://www.dvb-t-portal.de/Regionen/ |
| Europe | http://www.dvbtmap.eu/ |
Trouble Shooting
- Why can’t I get any channels from the antenna?
Your TV may not be functioning in the desired mode, or may not be scanning for channels properly. Please refer to the manual of your TV for detailed instructions.
- Why is my reception so poor?
The signals at the position of your antenna may be very weak due to obstructions in your surroundings. Please try to reposition the an- tenna and rescan for the channels. It may help to place the antenna in a higher position or close to a window.
- Why can’t I get a specific channel that is known to be available in my area?
There may be obstructions between the antenna and the broad- cast tower of your desired channel. Please try to reposition the antenna and re-run the channel scan.
DOWNLOAD PDF
Avantek Indoor HDTV Antenna User Manual
