Lectrofan Micro2 Non-Looping Sound Machine Manual

Lectrofan Micro2 Non-Looping Sound Machine Manual

OVERVIEW

1. Microphone
2. Previous Track/Sound
3. Volume Down/Up
4. Play/Pause, Answer/Hang Up/Redial
5. Next Track/Sound
6. Indicator Lamp
   1. Solid Blue: Bluetooth Connected
   2. Blinking Blue: Bluetooth Audio Playing
   3. Red: Charging
   4. Green: Charging Complete
7. Charging Port
   

Charge Your Micro 2 Before First Use

Connect the Micro 2 to a USB power source using the supplied cable. The indicator lamp will glow red, then change
to green when fully charged. A power adapter for any smartphone or a PC USB jack can be used to charge your Micro 2.
Tip: to conserve battery power, always place the slider in the OFF position when not in use

Sound Masking:

1. Slide switch to
2. Select sound

Bluetooth Audio:

1. Slide switch to the left
2. Select Lectro Fan MICRO 2 from your Bluetooth device. If it doesn’t appear, make sure it is not connected to another phone and is within range.

Tip: only one Bluetooth device can be connected at a time.

Answering Calls:
When your Micro 2 is connected to a smartphone, press to answer the call, and again to end the call. Double-press to redial the last dialed number.

Specifications

• Power: 5V, 1A USB-A
• Audio Output: < = 3W
• Bluetooth Range: Up to 50 feet/15 meters
• Lithium-ion Battery Capacity: 1200 mAh
• Battery Run Time (at typical volumes):
• Bluetooth Audio: Up to 20 hours
• White Noise/Fan/Ocean Sounds: Up to 40 hours
• Battery Charge Time: 2½ hours

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. © 2018 Adaptive Sound Technologies, Inc. All Rights Reserved. Lectro Fan, Lectro Fan Micro 2, Adaptive Sound Technologies, the Sound of Sleep logo and the ASTI logo are trademarks or registered trademarks of Adaptive Sound Technologies, Inc. All other marks, including Bluetooth®, are registered trademarks or registered trademarks of Adaptive Sound Technologies, Inc. All other marks, including Bluetooth®, are registered trademarks of their respective owners.

DOWNLOAD LINK

https://www.soundofsleep.com/wp-content/uploads/2019/01/LFMicro2-QSG_Final2.pdf