Sunjoe iON100V-21SB-CT cordless snow blower Owner manual
Product Information
A battery pack (type iON100V-2.5AMP or iON100V-5AMP) is necessary to run the device, a cordless snow blower. Before using it for the first time, the battery pack, which is supplied separately, needs to be fully charged. It is necessary to connect the battery charger (which is available separately) to a power source that has the voltage noted on the rating plate. When the battery pack’s capacity drops to just 80% of what it was when it was new, it needs to be replaced.
Product Safety Guidelines
The charger and its cord should be kept away from heat, oil, and sharp edges, according to the product’s safety recommendations. Damaged cords need to be fixed by an expert technician or by contacting the Snow Joe® + Sun Joe® customer care department. When using grounded appliances, adaptor plugs should never be utilised; instead, electrical plugs must match the outlet. Keep the cordless tool, battery pack(s), and battery charger out of children’s reach. During periods of prolonged use, the battery pack(s) will get warm; you must allow them to cool to room temperature before placing them into the charger to recharge. Batteries shouldn’t be overcharged and shouldn’t be kept in the charger for extended periods of time. Batteries that have been exposed to heat during the charging process must not be used, and batteries that have suffered curvature or deformation during the charging process must not be used.
Conclusion
The cordless snow blower is a useful tool for clearing snow, but it requires careful handling and maintenance to ensure safety. The battery pack(s) and charger must be handled with care, and the safety instructions must be followed to avoid injury or damage to the product. It is important to store the battery pack(s) and charger in a cool, dry place and to avoid overloads and exhaustive discharge. By following the safety instructions, users can enjoy the benefits of the cordless snow blower while minimizing the risks.
