ILIFE V3s Pro Vacuum Cleaner
Positioning the charging dock.
Please the charging dock against a wall and connect t adapter to an outlet. It is suggested to leave an area n at least 4 feet (1 meter) on each side of the charging d and at least 8 feet (2 meters) in front of the charging c Do not place the charging dock around doors and stair.
For optimizing performance of your robot, try best to p open one try best to place the charging dock in an open and uncluttered area.
Wake up and charge your robot
Turn on the power switch at the side of body, then place your robot on the charging dock for a full charge. When charging is finished, all lights will turn off. Always keep the power switch turned on during your daily use. Turn off the power switch only when you don’t use your robot for more than one week.
Setting a schedule
- When a schedule is confirmed, robot will start cleaning automatically at the same time every day. If the robot is turned off, you
- will need to schedule again.
- Point the remote control towards the robot.
- Press © and then use directional buttons to set the scheduled.
- Press ) to save the setting. To cancel the schedule, please set the time to 00:00 or turn off the robot.
Robot Maintenance
- For better cleaning performance, empty dustbin and clean high performance filter after each use (High Performance relater can’t be washed with water. Replace with a new one when it is needed.
- In homes with heavily shedding pets, dustbin may fill quickly with fur or hair. In these cases, you may need to empty dustbin and clean filters more frequently
V3s Pro is ready to clean
Switch on the robot
A Make sure the power switch is on. Press CLEAN on the robot Orel on the remote control to start cleaning. * To switch from sleep mode to select mode, press CLEAN. Press CLEAN again to start cleaning.
Pause
Pause the robot to switch from cleaning mode to select mode. Press CLEAN button on the robot. Barres r button on the remote control.
Sleep
To turn robot into sleeping mode from selected mode: Keep pressing CLEAN button on main body for 3 seconds. Robot enters sleep mode if it does not receive any commands in 15 seconds.
Trouble Shooting
Error code sheet
When the robot meets with some routine troubles it wireman vow by been
• Short ton
- Note: If all above solutions don’t work, please take below actions.
- Re-set the robot by re-turning on the power switch.
- If re-set action doesn’t work, please contact support@iliferobot.com
Contact Us
Email Us
Technical Support
support@iliferobot.com
Tweet Us
@ILIFEROBOTICS
Mon-Fri: 9:00AM – 18:00pm
ILIFE Customer Service
Toll-Free Number:
1-800-631-9676 (Toll free for USA & Canada)
Monday-Friday from 9:00 AM -5:00 PM CST
