Eufy Video Doorbell 2K Battery 
For Video Doorbell Installation
For Homebased 2 Installation
Video Doorbell (Battery Powered
Video Doorbell (Battery Powered)
HOW THE SYSTEM WORKS
How the System Works
The video doorbell system includes 2 parts. One is the video doorbell at your door. The other is the Homebased in your house. The video doorbell detects motion at your porch and allows you to answer the door anytime and anywhere. The Homebased stores video clips on its built-in storage. When someone rings the doorbell, people in the house will be notified.
STEP 1 CONNECTING THE HOMEBASE
Connect the Homebased 2 to the Internet
- Power on the Homebased 2, then use the ethernet cable provided to connect the Homebased 2 to your home router.
- The LED indicator turns blue (this may take up to 1min) when Homebased 2 is ready for setup.
STEP 2 SETTING UP THE SYSTEM
Download the App and Set up the System
Download the Eufy Security app from the App Store (iOS devices) or Google Play (Android devices)
STEP 3 DETERMINING THE POWER OPTION
Option 1 – Battery Powered
- . If you don’t have existing doorbell wiring at the front door, use the built-in battery. You are free to determine the doorbell position and the mounting is easy and quick.
- When the doorbell battery level is low, you need to detach and charge it.
- If you choose this option, please jump to
STEP 4 FINDING A MOUNTING SPOT.
Sign up for a Eufy Security account, then follow the onscreen instructions to complete the setup.
Option 2 – Doorbell Wire Powered
- If you have existing and working doorbell wiring at the front door, the doorbell will be powered by the wires constantly. So you don’t need to detach and charge it after installation.
- Since the doorbell is connected to the wires, the mounting position is limited.
- If you choose this option, please jump to Appendix 3 Powering the Doorbell with Doorbell Wires.
STEP 4 FINDING A MOUNTING SPOT
Find a Mounting Spot Take the video doorbell to your front door and check the live view on the App at the same time. Find a location where you can get the desired field of view. Consider the below factors:
1. Check if you can reuse the existing holes and anchors on the wall or door frame.
2. If you want to place the doorbell close to a side wall, make sure the wall doesn’t show up in the field of view. Otherwise IR light will be reflected and night vision will become blurry.
3. If you are drilling the mounting holes for the first time, the recommended mounting height is 48″ / 1.2 m from the ground.
4. Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side.
Place the Screw Hole Positioning Card against the wall to mark the position.
STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill pilot holes. Use the provided screws to secure the Mounting Bracket on the wall, The Screw Hole Positioning Card indicates the position of the screw holes. What is required: Screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Packs
Mount the Doorbell on Surfaces Made Out of Hard Materials
1. If you’re mounting the doorbell on a surface made out of hard materials, like brick, concrete, stucco, drill 2 holes through the Screw Hole Positioning Card with a 15/64”(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the Mounting Bracket on the wall.
What is required: Power Drill, 15/64”(6 mmm) Drill Bit, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Packs
STEP 6 MOUNTING THE DOORBELL
Mount the Doorbell Align the doorbell on top and then snap it on the bottom. Press it down until it clicks into place.
APPENDIX 1 DETACHING THE DOORBELL
Detach the Doorbell
1. Use the doorbell detaching pin provided if you wish to detach the doorbell from the Mounting Bracket. 2. Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
What is required: Doorbell Detaching Pin
APPENDIX 2 RECHARGING THE DOORBELL
Recharge the Doorbell
APPENDIX 3 POWERING THE DOORBELL WITH EXISTING DOORBELL WIRES
3.1 Verify whether the doorbell wires are working
1. Ring the existing doorbell to check if it is working. If the doorbell doesn’t ring, your doorbell wires may be defective. Power the doorbell on its own battery or consult an electrician to fix the wires.
2. Shut off power at the breaker. Turn the lights on / off in your home to make sure the electricity in your house is properly shut off.
What is required: Philips-Head Screwdriver
3.3 Find a Mounting Spot
1. Determine the mounting position of the doorbell. Consider the below factors: ① Check if you can reuse the existing holes and anchors on the wall or door frame.
② If you are drilling the mounting holes for the first time, the recommended mounting height is 48″ / 1.2 m from the ground.
③ Use the 15° mounting wedge as a supplementary mounting bracket if you wish to see more on a specific side
2. Place the Screw Hole Positioning Card against the wall to mark the position.
4 Mount the Bracket
If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill pilot holes. Use the provided screws to secure the Mounting Bracket on the wall. The Screw Hole Positioning Card indicates the position of the screw holes. What is required: Power Drill, Mounting Bracket, 15° Mounting Wedge (Optional),
Screw Packs
If you’re mounting the doorbell on a surface made out of hard materials, like brick, concrete, stucco:
① Drill 2 holes through the Screw Hole Positioning Card with 15/64”(6mm) drill bit.
② Insert the provided anchors, and then use the provided long screws to secure the Mounting Bracket on the wall.
What is required: Power Drill, 15/64”(6mm) Drill Bit, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Pack
3.5 Connect the Doorbell Wires to the Doorbell
Connect the wires to the terminals at the back of the doorbell, then tighten the terminal screws. Wire can connect to any terminal. What is required: Wires and Wire Nuts (Optional), Video Doorbell, Philips-head
Screwdriver
3.6 Mount the Doorbell on the Bracket
Align the doorbell on top and then snap it on the bottom.
3.7 Restore Power
Switch the master circuit breaker back to ON.
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help. FCC Radio Frequency Exposure Statement\ The device has been eval ated to meet general RF exposure requirements. The device- can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to-maintain compliance with FCC regulations. The following importer is the responsible party: Company Name: POWER MOBILE LIFE, LLC Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-206-383-8247
CUSTOMER SERVICE
• Warranty
12-month limited warranty
• Call Us
United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mo-Fr 6:00-11:00
• Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
Hong Kong
