Eufy Floodlight Camera 2k
What’s in the Box
Power On the Floodlight Camera Indoors
1. Connect Floodlight Camera to a power source, and then wait 1 minute or until the LED indicator blinks red.
Get the Eufy Security App and Set up the Camera
Download the Eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
Login or sign up for a Eufy Security account, then follow the onscreen instructions to complete setup.
Mount Floodlight Camera Outdoors
Step 1
Unplug Floodlight Camera.
Step 2
Unscrew the power cord; wire nuts will be used later. The power cord is not required when mounting the Floodlight Camera outdoors.
Step 3
Shut down the circuit breaker in your house. Switch on/off the lights to make sure the electricity in your house is properly shut off.
Step 4
Remove the old Floodlight from the junction box and install the mounting plate to the junction box.
Step 5
- User can hang Floodlight Camera upside down or install it vertically on the wall. Select the installation method that best suits the position of your junction box. If you plan to install the Floodlight Camera on the wall, please skip to Step 6.
- For upside down installation, turn the camera down to the end when it’splaced vertically, then turn the camera 180° in clockwise direction.
Step 6
- Hang Floodlight Camera on the junction box with the hook provided.
- Connect both ground wires(yellow or green) from the junction box and Floodlight Camera, join the wires by using a wire nut. If the existing ground wire has been connected to the junction box or there’s no ground wire, connect the ground wire of the Floodlight Camera to the junction box or mounting plate directly.
- Use wire nuts to connect Floodlight Camera wires to the rest of the wires from junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from junction box. Connect the black wire on the Floodlight Camera to the black wire(hot) from junction box.
Step 7
Insert the central screw through the center of Floodlight Camera and screw it tightly.
Step 8
After installation is complete, you can turn the camera knobs on Floodlight Camera to adjust the camera to your desired angle.
Step 9
Switch on the main circuit breaker in the house. To check whether Floodlight Camera is operating, check if the LED indicator has turned solid white.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973
This product complies with the radio interference requirements of the European Community.
Customer Service
• Warranty
12-month limited warranty
• Call Us
United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
• Email Us
Customer Support: support@eufylife.com
