Brinno TLC200/ BCC100 Time Lapse Camera
![Brinno-ATH2000-Construction-Power-Housing-product](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMzciIGhlaWdodD0iMzU3IiB2aWV3Qm94PSIwIDAgMzM3IDM1NyI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
Firmware Upgrade Procedure
Before doing firmware upgrade process, please follow below steps and unzip the firmware upgrade package.
Step 1
Ensure your Time Lapse Camera is powered down and remove SD card from the camera. Then insert the SD card into your computer.Step 2
Copy and save the files:
TLC200FW.BIN / TLC201FW.BIN / TLC202FW.BIN into 200TLC00 folder in the SD card (200TLC00 folder should locate in the DCIM folder). If your SD card doesn’t have a folder named 200TLC00 in the DCIM folder, please create those folders by yourself.
If your SD card doesn’t have a folder named 200TLC00 in the DCIM folder, please create those folders by yourself.Step 3
Insert the SD card into the Time Lapse Camera.Step 4
Power on the Time Lapse Camera.
Step 5
After the upgrade tool has fully loaded, you will see an Updating Warning message on LCD screen, it
means that the camera is updating firmware. Please do not power o the camera when you see the warning!! Just wait until the upgrade is completed.
Done
Once completed the upgrade, verify your new version to make sure the upgrade was successfully completed.
Please do not TURN OFF power or REMOVE SD card when camera is updating firmware as that will damage the camera.
Supports: customerservice@brinno.com
Download Pdf Link