Brinno ATH2000 Construction Power Housing User Mnaual

Brinno ATH2000 Construction Power Housing

In the Box

Parts of Device

Install Camera

1.  Remove camera mounting screw.
2.  Depends on different cameras, install a screw to their respective positions.
3.  Tighten screw until secure.

Install Batteries

1.  Loosen the screw and remove battery slot from power housing.
2.  Install batteries
3.  Check battery level.

•  Plug the power cable into your camera.
•  Turn camera on.
•  Press battery level check button.

4.  Battery indicator

Installation

1.  Install camera and battery slot into camera housing.
2.  Tighten the screw to lock battery slot’s position in place.
3.  Take out desiccant and pack it into power housing.

For TLC200, TLC200Pro (with kit lens) and TLC200Pro (with BCS lens).

For TLC120, TLC130, TLC2000 (with kit lens) and TLC2000 (with BCS lens).

4. Close the power housing and lock the latch.

Regularly replace used desiccant can maintain the long-term function of ATH2000.

How to Change Lens Cover

1.  Loosen screws.
2.  Remove kit lens cover.
3.  Mount extension lens cover
4.  Tighten screws.

Specifications

Download Pdf Link

https://www.brinnosupport.com/support/Download/ATH2000/ATH2000_Manual_EN_A2_(301-0126-01)_20180625.pdf