Brinno BCC2000 Camera Clamp Kit User Manual

Brinno BCC2000 Camera Clamp Kit

Package Contents

1.  Camera Clamp
2.  Magic Arm
3.  Wrench
4.  Main Extension Pole
5.  Threaded Extension Pole

Device Parts

CLAMP

1.  Clamp Head
2.  Extension Pole Hole Knob
3.  Clamp Head Knob
4. . Mounting Hole (1/4″)
5.  Handle
6. MAGIC ARM
7.  Mounting Platform (1/4″)
8.  Flex Arm Knob
9. MAIN EXTENSION POLE
10.  Tightening Knob
11.  Tube Adanter

Assembling

1. Mount the magic arm onto clamp. Use wrench to secure the magic arm.
2. Swivel the handle to release the clamp
3. Irregular cushion (for tube shape object)
4. Grooved cushion(for cube shape object)
5. Mount the clamp. Tighten it. Clamping range: 0.04~3.Sin (1 – 90mm)
6. Mount the camera onto the mounting platform. Use wrench to secure the camera.
7. Turn the flex arm knob to adjust the shooting angle. Tighten it.

Extend Clamping Range

• Single Pole (3.5-7.1in) 90-270mm

1.  Loosen the extension pole hole knob.
2.  Pull out the clamp head knob.
3.  Take off the clamp head.
4.  Slide the main extension pole. Align the groove to push two sections together.
5. Tighten the knob.
6.  Put clamp head back on & slide it to the main extension pole
7.  Tighten the extension pole hole knob.

Clamping range (for flat surface)

Multiple Extension Poles

Remove the tube adapter.

1.  Assemble threaded extension pole onto the main extension pole.2. Install tube adapter to the other side of threaded extension pole.

Install the clamping head.

specifications

Download Pdf Link

https://www.brinnosupport.com/support/Download//BCC200/BCC200_QG_UN_A1(301-0089-20)_20160126s-web.pdf