Brinno BCC200 Construction Camera Pro
Brinno BCC200 Construction Camera Pro
CONSTRUCTION CAMERA – BCC200
TimeLapse Camera (TLC200 pro
Weather Resistant Housing(ATH120)
Camera Holder
Rubber Strap
BCC200 – Installation
STEP 1.
Insert an SD Card and switch on the Time Lapse Camera power.
STEP 2.
Insert the Time Lapse Camera into the Weather Resistant Housing, confirming the waterproof seal is aligned correctly.
Keep the inside of the Weather Resistant Housing dry before inserting the Time Lapse Camera.
STEP 3.
Please make sure the Time Lapse Camera lens is positioned correctly to fit into the transparent lens (Housing).
Close the Weather Resistant Housing door and latch the buckles (Top and bottom).
STEP 4.
Start Recording
- Set up screen
- The LCD will display the set up screen.
- Set the Time Interval and AVI frame rate.
Suggestion
Depending on big or small construction project , we suggest below setting:
For more than 80 days using , please choose Energizer® Ultimate Lithium AA Batteries. Please find TLC200 Pro user manual for more detail of setting
- Preview screen
- Press OK to proceed to the Preview Screen, frame your subject.
- Press OK again to start the recording process.
STEP 5.
Installation
(TLC200 pro+Camera Holder)
(TLC200 pro+Rubber Strap)
STEP 6.
Finish
While recording, hold the “OK” button until the LCD light turns on and shows the text “Processing”, it means the camera is processing file closing. When completed the processing it will display the text “Ready” This indicates the recording session is complete.
Remove the SD card from the camera, and insert it into your computer or laptop to enjoy your amazing Time Lapse Videos.
DOWNLOAD PDF
Brinno BCC200 Construction Camera Pro User Manual
REFERENCE LINK
