Brinno -MAS 100 Motion -Activated -Sensor-feature

Brinno MAS 100 Motion Activated Sensor User Manual

Views: 68
Table of contents show

Brinno logo

Brinno MAS 100 Motion Activated SensorBrinno -MAS 100 Motion -Activated -Sensor-prodect

Package ContentsBrinno -MAS 100 Motion -Activated -Sensor-fig-2

  1.  Motion Activated Sensor (MAS100)
  2.  Hold
  3.  Receiver (RFS100)
  4.  2 AA Batterie
  5.  Screw

Before InstallationBrinno -MAS 100 Motion -Activated -Sensor-fig-3

  1.  Install 2 AA batteries on Motion Activated Sensor (MAS100).
  2.  Install receiver(RFS100) into extension port on PeepHole Viewer (PHV1330).

InstallationBrinno -MAS 100 Motion -Activated -Sensor-fig-4

  1.  Install Holder and tightening the screw.
  2.  Tear off the cover of double-sided glue.
  3.  Place your Motion Activated Sensor(MAS100) on our suggestion location:Brinno -MAS 100 Motion -Activated -Sensor-fig-5
    • a. Place on ceiling above the porch and face to ground.
    • b. Place above door, and adjust the Motion Activated Sensor angle, face to ground.

FinishedBrinno -MAS 100 Motion -Activated -Sensor-fig-6

  • Red LED light: Detecting
  • Red LED flashing: Battery Low

Now, you already finished the installation, for well working we suggest you to test the detect of Motion Activated Sensor, if it works on the location you placed, then you can use screws to fix it on the wall. If it doesn’t work, please try to adjust the detect angle or change to the other location.

SpecificationsBrinno -MAS 100 Motion -Activated -Sensor-fig-7

FCC Statement

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: – Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Thank you for purchasing Motion Activated Sensor for Brinno PeepHole Viewer! Brinno MAS100 is an extension accessory for PeepHole Viewer (PHV1330), it allows PHV1330 records images when a visitor come close to your door. So even if you are not at home, you will know who came to your door.Brinno -MAS 100 Motion -Activated -Sensor-fig-1

Thank you for purchasing Brinno’s PeepHole Viewer and accessories!
If you have any questions or problems setting up your Brinno PeepHole Viewer and accessories, please contact the sales staff where you purchased our product or email us at Brinno Incorporated directly customerservice@brinno.com .
Please Visit our website  www.brinno.com

Contact Information

Download Pdf Link

https://www.brinnosupport.com/support/Download/MAS100/MAS100_Manual_(EN%20A3)_20111017.pdf

Tags: , , , ,

Leave a Reply