Thank you for purchasing Brinno TimeLapse Camera!
Brinno TimeLapse Camera allows anyone to record the ins and outs of daily life, big
construction jobs, or small DIY projects…so you can see everything, and miss nothing!
Package Contents
Minimum Requirements to install and run the software
TimeLapse Camera Output file format
Length of battery usage
• TimeLapse Camera
• User Manual
• 2GB USB Flash Drive
• 4 AA Batteries
• Setup Software
Microsoft Windows 98, XP, Vista and Win 7
AVI format, resolution 1280x 1024.
Note: Tha maximum size of each single AVI file is 4096 frames.
1 Minute
5 Minutes
30 Minutes
1 Hour
4 Hours
24 Hours
5 Seconds
15000
4000
2500
2000
800
200
28000
10.4 Days
13.8 Days
52 Days
83 Days
133 Days
200 Days
38 Hours
Interval Capture Frames Battery Life
1 – Brinno TimeLapse Camera
1. Remove the TimeLapse Camera from the package.
2. Check to make sure that all the contents are included.
3. Open up the TimeLapse Camera by placing it Lens side down on a flat surface, or Lens side down in the
palm of your hand, and remove the battery door by pulling open the latch.
4. Insert four AA batteries according to the polarity direction (+ -).
5. Insert any standard USB Flash Drive into the TimeLapse Camera in the open slot between the
batteries.
Front view
Back view
Lens
Power button
Macro Image
Battery cover
USB Flash drive
Wheel
Standard Image
Mounting Hole
AA battery
How to setup your TimeLapse Camera
Brinno TimeLapse Camera – 2
• The maximum size USB flash drive that TimeLapse Camera can support is a 8GB USB Flash Drive. If you use a
USB flash drive with a larger memory density the camera will not function properly.
• Replace the battery door on the TimeLapse Camera. Make sure to push down the latch until you hear it “click”
to ensure the door is closed properly.
• With the wheel in the middle of the camera you can choose between one of seven time interval settings.
Simply rotate the wheel to choose the desired setting.
• The wheel MUST point to number directly, otherwise TimeLapse Camera can not work!
• To modify the custom setting, insert the included USB Flash Drive into your computer, and follow the
instructions. See “Installing the Software”.
• The custom setting can range anywhere from 5 seconds to 12 hours.
Factory default custom setting is set to 5 seconds.
NOTE
NOTE
Custom Time Interval settings:
1
2
3
4
5
6
7
Wheel position
1 minute
5 minutes
30 minutes
1 hour
4 hours
24 hours
Custom (factory setting = 5 seconds)
Time interval between pictures
To set your TimeLapse Camera on any standard
tripod, screw the tripod clockwise into the hole on
the bottom of the camera.
Mounting Hole
Mounting your TimeLapse Camera
3 – Brinno TimeLapse Camera
TimeLapse Camera has two lens positions that determine the focal distance and the depth of field of the
camera:
Standard Setting : Turn the lens to the “mountain” icon position. This will give a depth of field that
extends from approximately 1 meter (2.6 feet) and beyond, and is best for getting shots of an entire garden
or a large area.
Macro Setting : Turn the lens bezel to the “flower” icon position. This setting allows the camera to focus
on an object that is approximately 0.5 Meters (19 inches) away from the camera. Because the depth of field
is significantly reduced when using this setting, subjects in the background will be out of focus. This setting
is best for following the growth of a single bloom, or any other subject that requires close-up observation.
After choosing the lens setting appropriate to the subject to be photographed, the camera should be aimed
so that the lens is pointing at the center of the subject. Because the field of view of the lens is quite wide,
the positioning of the TimeLapse Camera does not have to be extremely precise. But because a typical time
lapse sequence takes place over a long period of time, it is suggested that a short test session (with a short
time interval) be used to ensure correct positioning of the TimeLapse Camera. Once the positioning has
been verified, then the desired time interval for the full time lapse sequence can be set, and its time to take
pictures.
Choose your Lens setting
The table above shows some typical distances, but since TimeLapse Camera is capable of focusing on
objects that are far away, it can also be used to photograph many other subjects.
For example, you could set up TimeLapse Camera to take a photo once every 24 hours to capture the
process of a house being built over several months. Or get a picture of the sunset every day for a year. The
possibilities are only limited by your imagination and creativeness!
The table below shows the approximate image size (width x height) based on
the distance between the camera and the subject(s) to be captured.
Macro view 0.5m / 19inch
1m / 39 inch
2m / 78 inch
3m / 118 inch
36 cm / 14 inch
75cm / 29 inch
146cm / 57inch
219cm / 86 inch
30cm / 12inch
56cm / 22 inch
110cm / 43 inch
168cm / 66 inch
Mode Distance from Target
Area(Meter / Inch)
Target Area captured
Width (cm / inch)
Target Area captured
Height (cm / inch)
• The AVI files created by TimeLapse Camera can be viewed on the program “TimeLapse Camera Player” in the
CD or using Windows media player, or most other AVI players.
NOTE
Brinno TimeLapse Camera – 4
Standard view
To turn on the TimeLapse Camera
To turn off the TimeLapse Camera
• If the USB flash drive is full, or the batteries are completely empty, TimeLapse Camera will not turn on. If the
batteries are too low for normal operation, it will turn on and beep twice, the red LED will turn on, and then
TimeLapse Camera will beep six times and turn off. If the USB flash drive is full, or not installed, TimeLapse
Cam will turn on and beep twice, then after a few seconds the blue LED will turn on, then TimeLapse Camera
will beep six times and turn off.
• When TimeLapse Camera is in operation the green LED will turn on for about one second every 15 seconds to
indicate that the camera is running properly and is ready to take photos.
• If there is any other status to report, the camera will do so at the same time as the green LED flashes. If the
batteries are getting low the red LED will turn on in unison with the green LED. If the USB flash drive is getting
close to being full, then the blue LED will turn on in unison with the green LED.
• If the camera has previously automatically shut down due to low batteries or a full USB flash drive, the next
time the power button is pressed the red or blue LED will turn on and will stay on until the green LED turns on.
This allows you to determine the cause of the automatic shutdown so that the appropriate corrective action
can be taken.
• The green LED will also turn on and flicker for a few seconds while a picture is captured at the chosen time
setting, and then is stored on the USB flash drive. This indication of TimeLapse Camera activity is independent
of the status indication that occurs every 15 seconds.
NOTE
On the front of the TimeLapse Camera, above the lens, there are three LED lights.
These LEDs allow you to monitor the status of the camera without having to move the camera from its
mounted position.
Press and hold the orange power button on the front of the camera until the green LED lights up. After a few
seconds the TimeLapse Camera will beep twice to indicate it has properly initialized and is waiting to start
a time-lapse sequence. After a delay of approximately 5 seconds the TimeLapse Camera will take the first
picture of the time-lapse sequence.
Press and hold the orange power button until the TimeLapse Camera beeps three times and the green
LED turns off. This may take several seconds because the TimeLapse Camera must first power itself on
and initialize before it recognizes the turn off request. Please be patient and wait for the beeps and LED
indication.
Each LED supports a different function:
Green LED light: Power ON/OFF and status
Red LED light: Low battery level
Blue LED light: Low USB flash drive level
Beep:
Power ON: Two beeps
Power OFF: Three beeps
Register setting change: Three beeps
Error status: Six beeps
(error = no USB flash driver, USB memory short, low battery)
TimeLapse Camera Operation
5 – Brinno TimeLapse Camera
Standard Installation
Manual Installation
Two installation options are provided.
The No Questions Asked Installation option is
the standard installation and asks no technical
questions. This is the recommended method of
installing the time, date and custom time interval
setting program.
The Do Not Install option allows you to exit
the setup program without installing “Brinno
TimeLapse Camera”.
1. There are 2 programs on the USB Flash Drives supplied with the TimeLapse Camera. The first program
“TimeLapse Camera Setup” allows you to set the time and date of the TimeLapse Camera to your local
time. This program also allows you to set the time interval for the Custom setting on the TimeLapse
Camera.
2. The second program called “TimeLapse Camera Player” allows you to play the videos taken by the
TimeLapse Camera. (You can download the latest program from www.brinno.com).
3. Before running the Brinno TimeLapse Camera programs, they must first be installed on your computer
using one of the methods described below.
1. Insert the USB Flash Drives included into your computer.
2. The USB Flash Drives will automatically open to the folder named “Brinno TimeLapse Camera”, where you
will see an icon named “Setup TimeLapse Camera”.
3. Double click on this icon to start the setup program.
If you insert your USB Flash Drives into your computer and it doesn’t automatically open up to show the
“Setup TimeLapse Camera” icon, use the following procedure to install the program manually.
1. Browse to the USB Flash Drives and find the “Setup TimeLapse Camera” icon.
2. Double click on this icon to start the setup program.
Installing software
Brinno TimeLapse Camera – 6
If you choose this option, the next step is to read
the user agreement. If you agree, then click “Yes, I
do” to continue.
The software will then be loaded onto your
computer and you can click the “Thanks” button
to complete the installation.
The setup program will then create and open a program group called “Brinno TimeLapse Camera” containing
three icons.
The “TimeLapse Camera Setup” icon is used to start the time, date and custom time interval setting program.
The “TimeLapse Camera Player” is used to play the videos taken by TimeLapse Camera.
The “Remove TimeLapse Camera”icon can be used to uninstall the program.
7 – Brinno TimeLapse Camera
Fluorescent Lighting Frequency
Select the correct lighting frequency to match
your indoor lighting frequency.
USA: 50Hz, Europe: 60Hz
Note: Turns the flicker filter off. This is the
normal way to operate a camera in an outdoor
environment.
Custom Time
You can set the custom time from 5 seconds
to 12 hours.
Low Light Record
This option allows your TimeLapse Camera to
work in low light environments.
USB Flash Drive
Select a drive letter assigned to your USB flash
drive.
Local Time and Date
Set the time and date to your local time.
“TimeLapse Camera Setup” allows you to set the time and date of the TimeLapse Camera to your local time.
This program also allows you to set the time interval for the Custom setting on the TimeLapse Camera.
A
B
C D
E
A
B
C
D
E
How to use “TimeLapse Camera Setup”
Brinno TimeLapse Camera – 8
1. Insert your USB Flash Drive into any
available USB port on your computer.
Windows will automatically assign a drive
letter to the USB flash drive. Make a note
of the drive letter assigned to the USB
flash drive.
2. Start the “TimeLapse Camera Setup”
program by double clicking the
“TimeLapse Camera Setup” icon in the
“Brinno TimeLapse Camera Setup”
program group. If the program group is
not open, you can open it by using the
“Start, Programs..Brinno” menus to find the
program group.
3. The “TimeLapse Camera Setup” program
has a number of fields that can be
modified. There are two fields that allow
the time and date to be set, and there are
three fields that allow the Custom time
interval to be set. A sixth field is used to
tell the program which drive is to be used
to store the file with the time and date and
custom time interval data. Make sure the
drive letter in this field matches the drive
letter in step 1. Once all the fields have
been set, hit the OK button to save the file.
Loading your Time and Date Stamp and Custom Time
Interval Setting onto your USB Flash Drive
4. Remove the USB flash drive from your
computer’s USB port. Make sure your
TimeLapse Camera is turned off, and
then insert the USB flash drive into your
TimeLapse Camera in between the four AA
batteries.
5. Turn on TimeLapse Camera. When it
detects the time and date file on the
USB flash drive it will automatically load
the data from the file, beep three times,
then turn off. The next time you turn on
TimeLapse Camera it will be set to the time
and date that were in the file. TimeLapse
Camera will also remember the Custom
interval setting that was in the file.
Once you have set up your TimeLapse
Cam you are READY to begin capturing
nature in action everywhere!
9 – Brinno TimeLapse Camera
Start the “TimeLapse Camera Player” program by double clicking the “TimeLapse Camera Player” icon in the
“ Brinno TimeLapse Camera” program group. If the program group does not open, you can open it by using
the “Start.. Programs.. Brinno..” menus to find and open the program group.
TimeLapse Camera player is designed for use with
the Brinno’s TimeLapse Camera.
The AVI file format produced by the TimeLapse
Camera is a Motion JPEG-encoded AVI in a standard
format recognized by Microsoft’s Windows Media
Player and most other Generic Video Players.
1.1. Menu Functions
1.1.1. File – Open
“File Open” lets you select an AVI file for loading
and displaying. Multiple files can be selected,
and will be added to the play list.
1.1.2. File – Save Current
“File Save” .The currently-displayed frame can be
saved as a JPEG file.
1.1.3. File – Exit
This exits the application. The standard Windows
close application commands will also function.
Statistics display
Key statistics for the video
sequence are shown in a
statistics box, displayed in
the upper-right corner of the
application window.
Capture Interval: The number
of elapsed seconds between
frames. This is determined
by switch settings on the
camera, and the information
is embedded in the video sequence.
Elapsed Time: This is the amount of time elapsed
since the beginning of the sequence.
Date/Time: Assuming that the correct date and
time have been set in the camera’s real time clock,
this is the time and date at which the
currently-displayed frame were captured.
1.2. Drag and Drop Interface
In addition to the standard menu commands,
TimeLapse Camera Player supports a “dragand-drop” interface. If the application is open,
dragging and dropping a file or group of files
can add them to the selected files to the playlist.
TimeLapse Camera Player
• The TimeLapse Camera Player is NOT a general-purpose media player. It is a dedicated Player designed
specifically to play AVI’s produced by the TimeLapse Camera. AVI’s NOT generated by Brinno’s TimeLapse
Camera will not play properly with this player
NOTE
How to use “TimeLapse Camera Player”
Brinno TimeLapse Camera – 10
1.3. Speed Control
1.4. Play Controls
1.4.1. Forward Play Control
1.4.2. Reverse Play Control
1.4.3. Single Step Forward Control
1.4.4. Single Step Backward Control
1.4.5. Pause Control
1.4.6. Stop Control
1.5. Seek Control
The Speed Control is a vertical
tracking control on the right side of
the display window. This is used to
set the playback rate. Because this is a
time-lapse camera, the playback rate
has to be different from the recording
rate.
Note that in some installations, if the
requested playback rate exceeds the
host PC’s ability to decompress and
display frames, some frames may be
skipped in order to keep up with the
requested TimeLapse Camera rate.
For a mode in which frames will never
be skipped, read about the Motion
Search feature, described below.
Controls are enabled or grayed-out, depending
on their functionality. For example, while playing
the video forward or backward the single-step
buttons are grayed out.
The forward play control functions is the
same as the play control on most media
players. Pressing this button with the
mouse causes the player to continuously
display frames until the end of the
sequence is reached, or the stop or
pause control is pressed.
The reverse play control causes the
player to play in reverse until either the
beginning of the sequence is reached, or
the stop or pause control is pressed.
Pressing this control causes the player to
display the next frame in the sequence.
Pressing this control causes the player
to display the previous frame in the
sequence.
Pressing this control during play stops
the player at the current frame. In Pause
mode, single step forward and backward
are enabled.
Pressing this control during play stops
the player, and returns it to the first frame
of the sequence. Single-step forward
function is enabled.
When the player is in Pause or Stop mode, the
seek control is displayed. This can be used to seek
any point in the sequence, either by watching the
images in the display window, or by monitoring
the elapsed time or real-time indicators.
• During play mode, the seek control is concealed.
NOTE
11- Brinno TimeLapse Camera
1.6. Playlist
1.7. Motion Search
1.7.1. Threshold
1.7.2. Search Forward
1.7.3. Search Backward
1.7.4. Stop Motion Search
TimeLapse Camera Player
allows you to play multiple
files, either from the same
directory or from multiple
directories. To add files to an
existing playlist, simply drag
and drop one or more files
into the TimeLapse Camera
Player window. Alternatively, using the “File –
Open” dialog box will allow you to select multiple
files.
Files will be sorted in the playlist by their date and
time stamp.
Wherever possible, the TimeLapse Camera Player
moves from one file in the playlist to the next,
whether in regular play, single-frame, or motion
search mode.
To skip files in the playlist, you can either click
on the “Previous” or “Next”: buttons, or you can
double-click on any filename in the playlist.
To clear the playlist, you can click on the “Clear”
button.
For certain uses such as
surveillance and security
applications, TimeLapse
Camera Player incorporates a
motion search algorithm. This
lets you quickly scan through
long sequences in which
nothing moves, and only see
frames where the scene has changed.
Motion Search is only available when TimeLapse
Camera Player is in a paused or stopped state.
Note that during motion search, the main display
is not updated. This allows the motion search to
This sets how sensitive the motion detection is. A
value of 0 is most sensitive; any variation from one
frame to the next stops the motion search.
A threshold of 255 or greater is least sensitive; no
change in the image will stop the search.
TimeLapse Camera Player scans from the
current frame toward the end, looking for
a frame differing from the previous frame
by more than the threshold value. When
TimeLapse Camera player detects a frame
with motion, that frame is displayed in the
main image window and the player is put
into Pause mode.
Backward motion search functions the
same as forward motion search, except that
it scans from the current frame toward the
beginning of the sequence.
Stop Motion Search stops the motion search
at the current frame, and place TimeLapse
Camera player into Pause mode.
Brinno TimeLapse Camera – 12
proceed more quickly than normal playback.
A subset of the image is displayed above the
motion search controls, to provide visual feedback.
Thank you for purchasing Brinno TimeLapse Camera!
If you have any questions or problems setting up your Brinno TimeLapse Camera
please contact the sales staff where you purchased our product or email us at
Brinno Incorporated directly
customerservice@brinno.com
Please Visit our website
www.brinno.com
Specifications
Model
Video Resolution
Field of View
Focal Length
Macro Effect
Time Interval Settings
Portable Memory Storage
Power Source
Size (DxWxH)
Weight
Housing Material
TLC 100
1280x 1024 (HD Resolution, AVI format)
49.5º
20″ to infinity
20″ with background unfocused
• Six default settings:
1 minute , 5 minutes, 30 minutes, 1 hour , 4 hours, 24 hours
• One Customized setting :
from 5 seconds to 12 hours.
Up to 8GB USB Flash Drive (2GB USB Flash Drive included)
4 AA Batteries (Included)
2.08 x 3.66 x 7.55 inches
0.56 lbs (without batteries)
Weather resistant plastic
13 – Brinno TimeLapse Camera
7F, No. 75, Zhou Zi St., Taipei City 11493, Taiwan
Phone: +886-2-8751-0306 Fax: +886-2-8751-0549
Email: customerservice@brinno.com
www.brinno.co
DOWNLOAD PDF
Brinno TLC200Pro HDR Time Lapse Camera User Manual