Panasonic H-ES12035 Lumix Leica Lens
Thank you for purchasing Panasonic product. Please read these instructions carefully before using this
product, and save this manual for future use.
The lens can be used with a digital camera compatible with the lens mount standard for the Micro Four ThirdsTM
- It cannot be mounted on the Four ThirdsTM mount specification camera.
- For smoother recording, we recommend updating the firmware of the digital camera/lens to the latest version
- For the latest information on the firmware or to download/update the firmware, visit the following support website:
https://panasonic.jp/support/global/cs/dsc/ (English only) - Micro Four ThirdsTM and Micro Four Thirds Logo marks are trademarks or registered trademarks of OM Digital
Solutions Corporation, in Japan, the United States, the European Union and other countries - Four ThirdsTM and Four Thirds Logo marks are trademarks or registered trademarks of OM Digital Solutions Corporation, in Japan,
the United States, the European Union and other countries - LEICA is a registered trademark of Leica Microsystems IR GmbH. ELMARIT is a registered trademark of Leica Camera AG. The LEICA DG lenses are manufactured using measurement instruments and quality assurance systems that have been certified by Leica Camera AG based on the company’s quality standards.
- Other names, company names, product names mentioned in this document are trademarks or registered trademarks of the companies concerned.
- The appearance and specifications of products described in this document may differ from the actual products youhave purchased due to later enhancement
Information for Your Safety
Keep the unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games,
radio transmitters, high-voltage lines etc.). - Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound.
- If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove
the battery and/or the connected AC adaptor. Then reinsert the battery and/or reconnect the AC adaptor and turn the camera on.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
- Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Supplier’s Declaration of Conformity
Trade Name: Panasonic
Model No.: H-ES12035
Responsible Party: Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ
07102-5490
Support Contact: http://shop.panasonic.com/support
Precautions
Handling of the lens
- When using this lens, take care not to drop, bump, or apply undue force to it. Doing so may cause malfunction
or damage to this lens and the digital camera. - Images may be affected by dust, dirt, and soiling (water, oil, fingerprints, etc.) on the lens surface. Before and after recording,
use a blower to blow off dust and dirt from the surface of the lens, then lightly wipe with a soft dry cloth to remove soiling. - When the lens is not in use, be sure to attach the lens cap and lens rear cap to prevent dust and other
particles from accumulating on or entering the lens. - To protect the lens contact points 1, do not do the following. These may cause malfunction.
(See illustration )
– Touch the lens contact points.
– Allow the lens contact points to become dirty.
– Place the lens with its mount surface facing down
Dust and splash resistant - Splash Resistant and Dust Resistant are terms used to describe an extra level of protection this lens offers
against exposure to a minimal amount of moisture, water or dust. These terms do not guarantee that damage will
not occur if this lens is subjected to direct contact with water or dust infiltration.
Take the following precautions to provide satisfactory dust and splash resistant performance. If the lens is not
working properly, consult the dealer or Panasonic.
– Attach to a digital camera that is dust and splash resistant.
– When attaching or removing the lens, be careful so that foreign objects such as sand, dust, and water
droplets do not adhere to or enter the lens mount rubber, contact points, digital camera and lens.
– If the lens is exposed to water droplets or other liquids, wipe them off with a soft, dry cloth. - To improve the dust and splash resistant performance of the lens, a lens mount rubber is used in the mount.
– The lens mount rubber will leave scuff marks on the digital camera mount, but this does not impact performance.
– For information on changing the lens mount rubber, contact Panasonic.
Condensation (when the lens is fogged up - Condensation occurs when the ambient temperature or humidity changes. Please be careful, as it may cause
lens stains, mold and malfunction. - If condensation occurs, turn off the digital camera and leave it for approx. 2 hours. The fog will disappear
naturally when the temperature of the digital camera becomes close to the ambient temperature.
Supplied Accessories
Check that all the accessories are supplied before using
the product.
Product numbers correct as of December 2022. These
may be subject to change.
1 Lens pouch
2 Lens cap¢
3 Lens rear cap¢
4 Lens hood
¢ Fitted to the lens at the time of purchase
Names and Functions of Components
- Lens surface
- Focus ring Rotates the focus ring to focus when set to MF
(Manual Focus).
You can set the amount of movement for focusing
using the focus ring with the menus in compatible
digital cameras. Refer to the operating instructions
for the digital camera for details. - Zoom ring
Zooms to telephoto or wide-angle. - O.I.S. switch
The stabilizer function is set to activate if the O.I.S.
switch is set to [ON].
We recommend setting the O.I.S. switch to [OFF]
when using a tripod. - Contact points
- Lens mount rubber
- Lens fitting mark
NOTE:
- There may be differences in focus when you use zoom
after focusing. Focus again. - While shooting video, in some situations, AF operation
and stabilizer operation of the lens may be heard. It is
recommended to record as follows:
– Set to MF to record
– Turn off the image stabilizer and use a tripod for recording - There may be some vignetting at the edges of the screen when
recording at a wide angle using the flash. We recommend using
the wide panel on an external flash to solve the vignetting issue.
Attaching the Lens
For information on how to attach the lens, refer to the operating instructions for your digital camera.
- Attach the lens after turning off the digital camera.
- Attach the lens after removing the lens rear cap.
(See illustration 1 ) - After removing the lens from the digital camera, be sure to
attach the lens cap and lens rear cap to prevent dust and
other particles from accumulating on or entering the lens.
Attaching the lens hood (See illustration 2 /3 )
Hold the lens hood with your fingers placed as shown in
the picture.
- Do not hold the lens hood in a way that twists or bends it
1 Align mark A ( ) on the lens hood with the mark on the tip of the lens.
2 Rotate the lens hood in the direction of the arrow to align mark B ( ) on the lens
hood with the mark on the tip of the lens.
- Attach the lens hood by rotating it until it clicks.
Removing the lens hood (See illustration 4 )
Rotate the lens hood in the direction of the arrow and then remove it.
Note:
- When carrying, the lens hood can be attached in the
reverse direction. (See illustration 5 )
- Align mark A ( ) on the lens hood with the mark on the tip of the lens.
- Attach the lens hood by rotating it in the direction of the arrow until it clicks.
- It is recommended to remove the lens hood during flash photography as the lens hood can block the light from the flash.
- To prevent dropping of the lens, you should never carry the lens by just holding the lens hood.
Notes on filter use:
- It is possible to attach the lens cap or the lens hood with the filter already attached.
- There may be some vignetting in recorded images if multiple filters are attached simultaneously.
- It is not possible to attach any items other than filters such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.
Cautions for Use:
- Do not spray the lens with insecticides or volatile chemicals.
– If such substances get onto the lens they can damage the exterior case or cause the paint to peel. - Do not point the lens at the sun or other strong light sources.
– This may cause the lens to collect an excessive amount of light, resulting in fire and malfunction. - Do not use while directly touching the lens at low temperatures for a long period of time.
– In cold places (environments below 0 oC (32 oF), such as ski slopes), prolonged direct contact with the lens
may cause skin injury. Use gloves or similar when using the lens for long periods. - When cleaning, wipe lightly using a soft dry cloth that does not produce dust.
– Do not use solvents such as benzine, thinners, alcohol, kitchen cleansers, etc., as this can cause problems such
as deformation of the casing or peeling of the coating.
– Do not use wipes with chemicals. - Do not keep products made of rubber, PVC or similar materials in contact with the lens for a long period of time.
- Do not disassemble or alter this product.
- When the lens is not going to be used for a prolonged period, we recommend storing with a desiccant (silica gel).
- Check all the parts before recording when you have not used the lens for a long period of time.
- Avoid using or storing the lens in any of the following locations as this may cause problems in operation or malfunctioning:
– In direct sunlight or on a beach in summer
– In locations with high temperatures and humidity levels or severe changes in temperature and humidity
– In sandy or dusty locations
– Where there is fire
– Near heaters, air conditioners or humidifiers
– Where water may make the lens wet
– Where there is vibration
– Inside a vehicle - Refer also to the operating instructions for the digital camera.
Troubleshooting
A rattling sound, etc. is heard when the digital camera is turned on or off or the lens is shaken.
There is a sound from the lens when taking pictures.
- This is the sound of the internal lenses moving or the aperture operating. It is not a malfunction.
Specifications
The specifications are subject to change for performance enhancement
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
“LEICA DG VARIO-ELMARIT 12-35mm/F2.8 ASPH./
POWER O.I.S.”
Limited Warranty
ONLY FOR U.S.A.
Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.
Mail-In Service–Online Repair Request
Online Repair Request
To submit a new repair request and for quick
repair status visit our Web Site at
http://shop.panasonic.com/support.
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured
and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a
daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED
TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits and Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized
Servicer, or damage that is attributable to acts of God
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty
lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to:
Panasonic Corporation of North America
Consumer Affairs Department 8th Fl.
Two Riverfront Plaza
Newark NJ 07102-5490
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Product registration is not mandatory. Failure to complete the form does not affect the consumer’s
warranty rights.
ONLY FOR CANADA
Panasonic Canada Inc
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated
below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new
or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by
Panasonic Canada Inc.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as
is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE
RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID
AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, or rental use of the product, or service by anyone other than a
Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries, printer ink cartridge and paper are also excluded from coverage under this warranty.
Rechargeable batteries are warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE
LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
(As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images,
data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you
may have other rights which vary depending on your province or territory.
WARRANTY SERVICE For product operation, repairs and information assistance, please visit our Support page: www.panasonic.ca/english/support
Download pdf
https://manuals.plus/m/5f749f7daa7464fb7566c0b6674d0e29512980ec23ffd126332d7cedb686a362_optim.pdf
