Sonoff DIY iFan03 Wi-Fi Fan & Light Controller Quick Guide
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing.
Wiring instruction
Please install protection devices before connecting the live wire. (e.g. fuses or air switches).
Make sure the neutral wire connection is correct.
Download APP
Power on
After powering on, the device will enter the quick pairing mode (Touch) during the first use, then the fan makes two short beeps and one long beep
it not paired within 3mins, the device will exit the quick pairing mode (Touch). If you need enter again, long press the “configuration button” on the controller or Wi-Fi pairing button on the RM433 remote controller and hold 5s until the fan makes two short and one long “bi* sound and release.
Add the device
Tap + and select “Quick Pairing”, then operate following the prompt on the APP.
Pairing method for the device and SONOFF RM433 remote controller:
Please press any button within 5s after powering on again until the ceiling fan makes a sound “di”, and pairing is successful.
User Manual
https://www.sonoff.tech/usermanuals
Scan the QR code or visit the website to learn about the detailed user manual and help.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
DOWNLOAD PDF LINK
