Monster 02320002 Table Mount Instrument Carrier User Manual
GENERAL ASSEMBLY INFO AND HOW TO
PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PROFILE CAP ASSEMBLY
PARTS
ASSEMBLY
WARNING NOTICES
CAUTION!
Do not clamp your fingers while attaching the instrument carrier. Check before usage if all screws are tightened. Check before usage that the instrument carrier is screwed on tight after making adjustments.
DANGER:
Contains small parts not suitable for children under 3 years. Only suitable for children over 12 years old and adults. All MTSIM products are hand-assembled and quality-checked. The mount is designed for usage only with a computer controller (e.g. joystick or throttle). We exclude liability if the product is used for purposes other than intended.
MTSIM shall be liable for damage arising from causes other than the detriment to life, body, and health only to the extent that such damage arises from wilful misconduct, gross negligence, or the culpable violation of a fundamental contractual obligation on the part of MTSIM or a vicarious agent (e.g. the delivery service) of MTSIM. Any further liability for damages shall be excluded. If you have safety concerns or questions regarding assembly, contact us at info@mtsim.com or visit www.mtsim.com/en/
