MONSTER Abra A7 V14.1 Gaming Laptop User Manual
Product Specification
This User’s Manual provides technical information of instructions and illustrations on how to operate this notebook for the customer. Please read this manual carefully before using this notebook.
| Dimension 392.9*260* 24.9mm Weight 2.55kg +/- 5% | |
| Processor – CPU | |
| Support Processor | i5-12500H |
| Graphic Card – GPU | |
| Graphic Card | 4 GB GTX 1650 |
| Memory | |
| DDR4 | DDR4 3200MHz |
| Display | |
| LCD | 17.3” 1920×1080,IPS/45% 144Hz |
| I/O Port | |
| DC-in | x 1 |
| USB | x 2: USB 3.1 (Gen1) |
| x 1: USB 3.1 (Gen2) | |
| x 1: USB 3.1 (Gen2) + DP1.4 | |
| I/O Port | |
| RJ45 | x 1 |
| HDMI 2.1 | x 1 |
| Audio out & Mic in | x 2 |
| Card reader | x 1 USB3.0 interface, SD/SDHC/SDXC, UHS-I speed |
| Connecter: Full SD size | |
| Audio | |
| Audio Codec Speaker/Mıc | Codec: CX11800 *Azalia standard support, *D3 mode support, *Smart AMP support Build-in 2 speakers *Speaker : 2W/each *Digitial Microphone support |
| Webcam | |
| Webcam | HD webcam with D-MIC*1 ,4mm |
| Communication Port | |
| LAN | *Supports 10/100/1000/2500 Mb/sec |
| *PCI-E interface | |
| *Power Down Mode D1~D3 support | |
| *PCIe ASPM L1.1, L1.2 support | |
| *UI for network package management | |
| Wireless LAN + BT | INTEL AX201 |
| Input | |
| Keyboard Pointing Device | Single Zone TDB5297, Outline: 154*100* 0.6 mm, AA: 150*94.6 mm, Mylar, Enable/Disable area :10mmx10mm, Palm Rejection:Support, Controller change to PCT3854, support Windows update |
| Power | |
| AC Adapter | Automatics Voltage adjustment between 100 and 240VAC 50/60Hz |
| 150 Watts (19V/7.89A) or (20V/7.5A), 3 Pins | |
| Battery | Li- polymer Battery, SW Gas Gauge IC, soft pack |
| 3 cells (3s1p 4100mAh)46.74Wh | |
For Keyboard Users
To activate these functions, press the hot key associated with the desired function as below :
| Keypad | Function Description |
| Suspend: | Press this key combination (Fn+F1) to enter sleep mode. |
| Windows Lock/On: | Press this key combination (Fn+F2) to turn Windows Lock/On . |
| Display Mode: | Press this key combination (Fn+F3) to enable Display Mode. |
| RADIO On/Off: | Press this key combination (Fn+F4) to turn all radios on or off. |
| Touch pad On/Off: | Press this key combination (Fn+F5) to On/Off Touch pad mode. |
| Keypad | Function Description |
| Keyboard Brightness down: | Press this key combination (Fn+F6) to decrease brightness of Keyboard. |
| Keyboard Brightness up: | Press this key combination (Fn+F7) to increase bright- ness of Keyboard. |
| MUTE: | Press this key combination (Fn+F8) to enter MUTE mode. |
| Volume down: | Press this key combination (Fn+F9) to enter Volume down mode. |
| Volume up: | Press this key combination (Fn+F10) to enter Volume up mode. |
| Brightness down: | Press this key combination (Fn+F11) to decrease brightness of LCD display. |
| Brightness up: | Press this key combination (Fn+F12) to increase brightness of LCD display. |
| Search Charm: | For a full list of Windows keyboard shortcuts, please visit the Microsoft official website. https://support.microsoft.com/en-us/ |
About Bios Setup
When To Use Bios Setup?
You may need to run the BIOS Setup when:
- An error message appears on the screen during the system booting up and is requested to run
- You want to change the default settings for customized
- You want to reload the default BIOS
How to Run BIOS Setup ?
To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
If the message disappears before you respond and you still wish to enter Setup, either restart the system by turning it OFF and ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your references only. The actual setting screens and options on your Notebook may be different because of BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key during POST that provide a approach to change some setting and configuration the user prefer, and the changed values will save in the NVRAM and will take effect after the system rebooted. The setup uses a menu interface to allow the user to configure their system and the features are briefly listed as follow.
