Ghome IPOTEK SK569-WU-AC Wifi Smart Power Strip Manual

Ghome IPOTEK SK569-WU-AC Wifi Smart Power Strip Manual

Function

Product Feature
SK569-WU-AC is an American standard WiFi smart power strip ( 3 independent outlets +2 USB (Type A+C ), which can be controlled by APP and remote. Equipped with remote control function, count down function, and timer function.

Product Parameter

Using Instruction

1. SK569-WU-AC is an American standard WiFi smart power strip ( 3 independent outlets +2 USB A+C ). The main function is to control the on/off and set timing via APP. Before using the device’s functions, you need to pair the WiFi first, namely, the product can connect to the Internet through WIFI, which can be a router or a mobile hotspot.
2. There is a button with an indicator on the housing. 1) Click the button–turn on/off the power strip, and the blue indicator light will light up when it is on and off when it is off; 2) Long press– enter into the EZ pairing mode, and the indicator will flash quickly and then connect to the network according to the EZ pairing steps.
3. Long press again when the indicator flashes quickly and then enter into AP pairing mode. When the indicator flashes slowly, then connect to the network according to the AP pairing mode.

FCC compliance information statement

• Product Name: Smart Wi-Fi Power Strip, 6-Outlet
• Model Number: HS300
• Responsible party:
• TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
• Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
• Website: http://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6803
• E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” We, TP-Link USA Corporation, have determined that the equipment shown above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made to the equipment and the equipment is properly maintained and operated.

REFERENCE LINK

https://device.report/manual/8949672

DOWNLOAD PDF LINK

Ghome IPOTEK SK569-WU-AC Wifi Smart Power Strip Manual