Kogan KAIRN01STMA 2000W Steam Iron Instruction Manual

Kogan KAIRN01STMA 2000W Steam Iron Instruction Manual

Introduction

Thank you for buying the 2000W steam-ironing system from KOGAN. The iron offers non-stop ironing functionality, with a detachable water tank that can be refilled at any time. The iron has a constant high steam output which is a unique feature for steam-ironing systems with unlimited autonomy. This gives you constant, fast ironing results.

General Description

A Steam Button
B Steam Trigger
C Handle Cover
D Handle
E Skirt
F Soleplate
G Station Skirt
H Water Tank
I Upper Station
J Self-Clean Cover
K Bottom Station
L Foundation Support
M Switch Button
N Panel
O Steam Control Knob
P Lower Water Indicator Light
Q Steam Indicator Light
R Rear Cover
S Temperature Control Dial
T Cord Hose
U Power Cord
V Cord Wrap Seat
W Water Tank Locker
X Water Tank Seat
Y Water Inlet Cover

Important

Reading this manual thoroughly before using the appliance will ensure optimum results and maximum safety. Save these instructions for future reference

• Check if the voltage indicated on the bottom of the steam tank corresponds to the local mains voltage before you connect the appliance.
• Only connect the appliance to an earthed wall socked
• Do not use the appliance if the plug, the cord, the hose or the appliance itself is damaged.
• Regularly check if the mains cord and the supply hose are still undamaged and safe.
• If the mains cord is the damaged, it must be replace by KOGAN, a service center authorized by KOGAN or similarly qualified persons in order to avoid a hazard.
• Never leave the iron unattended when it is connected to the mains.
• Never immerse the iron or the steam tank in water.
• Infirm persons should not be allowed to use the appliance without supervision. Keep the appliance out of the reach of children.
• The iron stand and the soleplate of the iron can become extremely hot and may cause burns if touched. If you want to move the steam tank, do not touch the stand.
• Always place the iron on the stand or on its heel. Do not put the hot iron on the supply hose or the mains cord. Make sure that mains cord and the supply hose do not come into contact with the hot soleplate.
• Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank.
• Always place the appliance on a stable, level and horizontal surface.
• When you have finished ironing, or plan to leave the iron for a short while, unplug the iron and put it on the iron stand.
• If steam escapes from the steam tank when the appliance is heating up, switch the appliance off and tighten the Calc-Clean rinsing plug. If steam continues to escape when the appliance is heating up, switch the appliance off and contact the KOGAN support team.
• Rinse the steam tank once a month or after 10 times of use to prevent damage to your iron.
• Never remove the Calc-Clean rinsing cap or unscrew the Calc-Clean rinsing plug when the steam tank is hot.

Before first use

• The iron may give off some smoke when you use it for the first time. This is normal and will stop after a short while.
• White particles may out of the soleplate (F) when you use the iron for the first time. This is normal; the particles are harmless and will stop coming out of the iron after a short while.
• When you switch the appliance on, the steam station may produce a pumping sound. This is normal; the sound tells you that water is being pumped into the boiler.
• Remove any sticker or protective foil from the soleplate (F) and clean the soleplate (F) with a soft cloth.
• Place the steam station on a stable and level surface, i.e. on the ironing board or on a table.

Preparing for use

Filling Water

• If the tap water in your area is very hard, we advise you to mix the tap water with a equal amount of demineralized water.
• Do not put perfume, vinegar, starch, descaling agents, ironing aids, other chemicals or 100 percent distilled water in the detachable tank(H).
• Pull down the Detachable water tank locker (W).
• Remove the detachable water tank (H) from the steam station.
• Fill the detachable water tank with water up to the MAX indication.
• Pull down the Detachable water tank locker(W).
• Slide the detachable water tank (H) back into the steam station.
• The detachable water tank (H) can be refilled at any time during use.
• This appliance has a built-in water level sensor. When the minimum level in the detachable water tank (H) has been reached, the water tank lower water indicator light (P) will start flashing. Steam ironing will not be possible！

Note: When you use the appliance for the first time or after Calc Clean, a lot of water will be pumped from the detachable water tank into the steam station. Refill the tank, if necessary.

Setting the temperature

• Set the temperature control dial (S) to the required ironing temperature by turning it to the appropriate temperature indication.
• Insert the main plug (U) into an earthed wall socket and press the power indicator.

The steam station and the iron will now start heating up. The iron takes approx. 1 minute to heat up to ●● and the steam station takes approx. 2 minutes to heat up. As soon as the steam station has reached its maximum pressure level and is ready for steam ironing, the steam indicator light (Q) goes on.

Tips

• If the article consists of various kind of fibers, always select the temperature required by the most delicate fiber, i.e. The lowest temperature. If, for example, the fabric consists of 60% polyester and 40% cotton, it should be ironed at the temperature indicated for polyester (●●).
• If you do not know what kind of fabric the article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. Silk, woolen and synthetic materials: iron the reverse side of the fabric ‐ to prevent shiny patches.
• Fabrics that tend to acquire shiny patches should be ironed in one direction only (along with the nap ) while applying very little pressure.
• Start ironing the articles that require the lowest ironing temperature first.

• To make the iron cool down faster, simply apply steam or iron a piece of cloth.

Using the appliance

Steam ironing

The cord hose (T) may become hot during a long ironing session.

• When plugged in, the power indicator light on the panel will start flashing and the iron will go into standby status. Press the power indicator button and the product will start working.
• The system may occasionally produce a pumping sound during steam ironing. This is normal and tells you that water is being pumped into the steam tank.
• Make sure there is enough water in the water tank..
• Steam ironing is only possible at higher ironing temperatures (higher than ●●).
• When the minimum level in the detachable water tank (H) has been reached, the “water tank lower water indicator light (P) will flash. This means you need to put water into the detachable water tank (H). The lower water indicator will stop flashing when you’ve put sufficient water into the detachable water tank (H).
• Press the steam button (A) to start steam ironing
• Pull up the steam trigger(B) to start continuous steam.
• Turn-on the steam control knob (O) for adjust steam.
• During steam ironing, the Steam indicator light goes on from time to time to indicate temperature and pressure.
• The opening and closing of the steam valve in the steam station will cause a clicking sound. This is normal.

Ironing without steam

Start ironing without pressing the steam station.

After ironing

• Place the iron securely on the stand.
• Switch the appliance off.
• Remove the mains plug from the wall socket and let the iron cool down.

Features

Vertical steaming

Never direct the steam at people.

• You can steam iron hanging curtains and clothes (jackets, suits, coats) by holding the iron in a vertical position and pressing the steam activator.

Cleaning and maintenance

After each use

Never immerse the iron in water nor rinse it under the tap.

• Clean the iron with a damp cloth.
• Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive cleaning agent.

Calc Clean

Never remove the Calc-Clean rinsing cap or unscrew the Calc-Clean rinsing plug when the steam tank is hot.

VERY IMPORTANT: Rinse the boiler once a month or after every 10 times of use to prevent damage to your iron. The scale that develops inside the boiler will not deposit onto the walls. Just calc-clean the boiler once or twice a month to keep your appliance in good condition.

• Make sure that the steam tank has been unplugged for more than 2 hours and is not hot.
• Remove the detachable water tank.
• Hold the steam tank with both hands and shake well.
• Turn the steam station on its side and remove the Calc-Clean rinsing cap & plug with a coin.
• Empty the steam tank by pouring out the water into a sink.
• Fill the boiler with fresh water by means of a cup and gently shake unit.
• Empty the boiler by pouring out the water into a sink. Repeat steps 6 & 7 twice to obtain the best result.
• Put the Calc-Clean rinsing plug back into the steam tank and tighten it with a coin.
• Put the Calc-Clean rinsing cap back onto the boiler.

Storage

Always let the iron cool down before storing it.

• Empty the water tank and store the supply hose and the mains cord.
• There are hand-grips on the either side of the steam tank for easy transport.

Troubleshooting

Please check the followings before repair

DOWNLOAD PDF LINK

KAIRN01STMA-A

https://help.kogan.com/hc/en-us/articles/360037103314-2000W-Steam-Iron-KAIRN01STMA-User-Manual