Pioneer Elite VSX-LX105 7.2 Channel Network AV Receiver How To Setup
System Setup
Menu list
| Input/Output Assign | TV Out / OSD HDMI Input Digital Audio Input | Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. Change input assignment between the input selectors and HDMI IN jacks. Change input assignment between the input selectors and DIGITAL AUDIO IN COAXIAL/ OPTICAL jacks. | p100 p102 p102 |
| Analog Audio Input | Change input assignment between the input selectors and AUDIO IN jacks. | p103 | |
| Input Skip | You can skip inputs to which nothing is connected when selecting them with the INPUT SELECTOR dial on the main unit or with the INPUT SELECT button on the remote controller. | p103 | |
| PERSONAL PRESET Information | Confirm the registered contents of 1 to 3 buttons of PERSONAL PRESET. | p104 | |
| Speaker | Configuration | Change the settings of connection environment of the speakers. | p105 |
| Crossover | Change the settings of crossover frequencies. | p106 | |
| Distance | Set the distance from each speaker to the listening position. | p107 | |
| Channel Level | Adjust the volume level of each speaker. | p107 | |
| Dolby Enabled Speaker | Change the settings of Dolby Enabled Speakers. | p108 | |
| Speaker Virtualizer | The Speaker Virtualizer function can be switched between On and Off. | p108 | |
| Audio Adjust | Dual Mono/Mono | Change the settings of multiplex audio playback. | p109 |
| Dolby | Change the setting of when Dolby signals are input. | p109 | |
| DTS | Change the setting of when DTS signals are input. | p109 | |
| Volume | Change the Volume settings. | p110 | |
| Source | Input Volume Absorber | Adjust the volume level when there are differences in volume level among multiple devices connected to this unit. | p111 |
| Name Edit | Set an easy name for each input. | p111 | |
| Audio Select | Select the priority for input selection when multiple audio sources are connected to one input selector. | p111 |
| Hardware | HDMI Power Management 12V Trigger Works with SONOS | Change the settings of the HDMI function. Change the settings for the power-save function. Set the 12V trigger output setting to each input. Change the settings to connect with the Sonos Connect. | p113 p114 p116 p116 |
| Multi Zone | Zone 2 | Change the settings for Zone 2. | p118 |
| Remote Play Zone | Change the settings for remote play. | p118 | |
| Miscellaneous | Tuner | Change the settings for Tuner. | p119 |
| Remote ID | Change the remote controller ID. | p119 | |
| Firmware Update | Change the settings for Firmware Update. | p119 | |
| Initial Setup | Make the initial setup from the setup menu. | p120 | |
| Lock | Lock the Setup menu so that the settings cannot be changed. | p120 | |
| Factory Reset | All the settings are restored to factory defaults. | p120 |
Input/ Output Assign
TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
q HDMI Out (Default Value: MAIN)
Select the HDMI jack to be connected with the TV.
- If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower
| MAIN | When connecting the TV to the HDMI OUT MAIN jack |
| SUB | When connecting the TV to the HDMI OUT SUB jack |
| MAIN+SUB | When connecting to both the MAIN and SUB jacks |
Dolby Vision (Default Value: MAIN)
To output Dolby Vision video from the player to a TV that supports Dolby Vision, select either the HDMI OUT MAIN jack or HDMI OUT SUB jack to which the Dolby Vision supported TV is connected. This setting is only necessary if you have set “HDMI Out” to “MAIN+SUB” and you have connected a TV to both the MAIN and SUB jacks.
| MAIN | To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT MAIN jack |
| SUB | To output Dolby Vision video to a Dolby Vision-supported TV connected to the HDMI OUT SUB jack |
| Off | After selecting “MAIN” or “SUB”, if the video on the TV does not appear correctly |
1080p -> 4K Upscaling (Default Value: Off)
When using a TV that supports 4K, video signals input at 1080p can be automatically upscaled to 4K for output.
- Ifthe TV does not support the 4K resolution with the same frequency as the frequency of HDMI input video signals, upscaling to 4K is not correctly Check the frequency of 4K resolution supported by the TV, and change the resolution of the video signals input from the AV component.
| Off | When this function is not used • Select “Off” if your TV does not support 4K. |
| Auto | When this function is used |
Speaker
Configuration
Change the settings of connection environment of the speakers.
Speaker Channels (Default Value: 7.1 ch)
Select “2.1 ch”, “3.1 ch”, “4.1 ch”, “5.1 ch”, “6.1 ch”, “7.1 ch”, “2.1.2 ch”, “3.1.2
ch”, “4.1.2 ch”, or “5.1.2 ch” to suit the number of speaker channels connected.
Subwoofer (Default Value: Yes)
Set whether a subwoofer is connected or not.
Yes When a subwoofer is connected
No When a subwoofer is not connected
Height Speaker (Default Value: Top Middle)
Set the speaker type if height speakers are connected. Select “Top Middle”,
“Top Rear”, “Rear High”, “Dolby Speaker (Front)”, “Dolby Speaker (Surr)”,
“Front High” or “Top Front” according to the type and layout of the connected speakers.
- If an item cannot be selected even though connection is correct, check that the settings in “Speaker Channels” matches the number of connected channels.
Zone Speaker (Default Value: No)
Set the connection of speakers to Zone 2 speaker terminals.
This setting cannot be selected when “Zone 2 Preout” is set to “Zone B”. Zone 2 When speakers are connected to Zone 2 speaker terminals No When speakers are not connected to Zone 2 speaker terminals.
Zone 2 Preout (Default Value: Zone 2)
Set an output destination of the audio output from ZONE 2 PRE/LINE OUT/ ZONE B LINE OUT jack.
This setting is fixed to “Zone 2” when “Zone Speaker” is set to “Zone 2”.
- Zone 2 When connecting an integrated amplifier in a separate room
- (ZONE 2)
Zone B When connecting an integrated amplifier, transmitter of wireless headphones, etc. to ZONE B
Bi-Amp (Default Value: No)
- Set whether the front speakers are bi-amp connected.
- This setting cannot be selected when surround back speakers or height speakers (4.1.2 ch, 5.1.2 ch) are installed.
No When front speakers are not bi-amp connected
Yes When front speakers are bi-amp connected
This setting is fixed to “No” if “Zone Speaker” is set to “Zone 2”.
Speaker Impedance (Default Value: 6 ohms or above)
Set the impedance (Ω) of the connected speakers.
For impedance, check the indications on the back of the speakers or their instruction manual.
- 4ohms When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance
- 6 ohms or above When the connected speakers all have 6 Ω or more impedance
Crossover
Change the settings of crossover frequencies.
- Front (Default Value: Small)
- Center (Default Value: Small)
- Height (Default Value: Small)
- Surround (Default Value: Small)
- Surround Back (Default Value: Small)
- Crossover (Default Value: 80 Hz)
- Double Bass (Default Value: On)
Distance
Set the distance from each speaker to the listening position.
- Front Left (Default Value: 10.0 ft/3.00 m)
- Center (Default Value: 10.0 ft/3.00 m)
- Front Right (Default Value: 10.0 ft/3.00 m)
- Height Left (Default Value: 10.0 ft/3.00 m)
- Height Right (Default Value: 10.0 ft/3.00 m)
- Surround Right (Default Value: 10.0 ft/3.00 m)
- Surr Back Right (Default Value: 10.0 ft/3.00 m)
- Surr Back Left (Default Value: 10.0 ft/3.00 m)
- Surround Left (Default Value: 10.0 ft/3.00 m)
- Subwoofer (Default Value: 10.0 ft/3.00 m)
Channel Level
Adjust the volume level of each speaker.
- Front Left (Default Value: 0.0 dB)
- Center (Default Value: 0.0 dB)
- Front Right (Default Value: 0.0 dB)
- Height Left (Default Value: 0.0 dB)
- Height Right (Default Value: 0.0 dB)
- Surround Right (Default Value: 0.0 dB)
- Surr Back Right (Default Value: 0.0 dB)
- Surr Back Left (Default Value: 0.0 dB)
- Surround Left (Default Value: 0.0 dB)
- Subwoofer (Default Value: 0.0 dB)
FAQS
- How do I physically set up the receiver and connect it to my TV and speakers?
- Please refer to the user manual that came with the receiver for detailed step-by-step instructions on physical setup, including connecting speakers, sources, and your TV.
- What do I need to know about speaker placement and wiring for a 7.2 channel setup?
- The user manual typically provides guidelines for speaker placement and wiring for different channel configurations. Follow these guidelines to ensure optimal sound quality.
- How do I run the automatic speaker calibration (MCACC) on the Pioneer Elite VSX-LX105?
- To run the MCACC (Multi-Channel Acoustic Calibration System) for automatic speaker calibration, follow these general steps:
- Connect the provided calibration microphone to the designated port on the receiver.
- Access the receiver’s setup menu and find the MCACC calibration option.
- Follow the on-screen prompts to start the calibration process. Ensure that the room is quiet during calibration.
- The receiver will measure speaker distances, levels, and adjust the sound settings accordingly.
- To run the MCACC (Multi-Channel Acoustic Calibration System) for automatic speaker calibration, follow these general steps:
- How do I connect the receiver to my home network for network features and firmware updates?
- To connect to your home network, you can use either an Ethernet cable or Wi-Fi, depending on your receiver’s capabilities. In the setup menu, look for network settings and follow the prompts to enter your network credentials.
- Can I use the Pioneer Remote App to control the receiver?
- Yes, Pioneer often provides a mobile app that allows you to control the receiver from your smartphone or tablet. Download the app, follow the setup instructions, and connect it to your receiver for remote control and additional features.
- What should I do if I’m not getting any audio or video output from the receiver?
- First, double-check all your connections to ensure they are secure and correctly plugged in. Ensure that the input source selected on the receiver matches the device you want to use. If you’re still having issues, consult the troubleshooting section in the user manual for guidance.
- How do I update the firmware on the Pioneer Elite VSX-LX105?
- Firmware updates are essential to keep your receiver up-to-date. Typically, you can check for firmware updates in the setup menu, and the receiver will guide you through the update process. Ensure your receiver is connected to the internet for this process.
- Can I use this receiver with a 4K TV and compatible sources?
- Yes, the Pioneer Elite VSX-LX105 is typically compatible with 4K Ultra HD content and can pass through 4K signals with HDR (High Dynamic Range) support. Ensure your sources and TV are also 4K-compatible for the best experience.
- What should I do if I encounter issues during setup or operation?
- If you run into problems, consult the troubleshooting section of the user manual for guidance on common issues and solutions. You can also contact Pioneer’s customer support for assistance.
