MPOW BH437A M30 True Wireless Earbuds User Manual
Packing List
Diagram
LED Light
Type-C charging Port
POWER ON
Mode 1
Mode 2
- The earphones automatically turn on(with white LED light flashing) and start pairing when you open the charging case.
- In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the white LED light flashing).
POWER OFF
Mode 1
Mode 2
- Put the earphones back in the charging case and close the case to turn them off.
- If the earphones are not in the charging case.just press and hold the MFB of both earbuds for 5 seconds to power them off.
PAIRING
Mode 1
Mode 2
- Open the charging case, they will automatically enter the pairing mode in which the LED light flashes white and red alternately, and then select “Mpow M30”.
- If the earphones are not in the charging case. firstly. turn on the earbuds by pressing and holding the MFB of both earbuds for 2 seconds. Next. double touch the MFB of Right earbud to enter the pairing mode in which the LED light flashes white and red alternately, and then select “Mpow M30” on your phone.
Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone, please disconnect Bluetooth on the paired smartphone.
RESET
In the state of charging, simultaneously press and hold the MFB of both earbuds for 5 seconds, The LED light will flash red, which means that the paired information is cleared successfully.
CHARGING
Do not put the earbuds in the charging case when the earbuds are wet
CORRECT DISPOSAL OF THIS PRODUCT
A This Marking shown on the product or its literature.indicate that it should not be disposed with other household wastes at the end of its working life. Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.
