Oladance B1 Wearable Stereo Earbuds User Manual
In the box
Product Introduction
Clear Bluetooth pairing list Tap and hold both buds at the same time for 5s
Bluetooth Discovery Mode Tap and hold 2s on both buds at the same time.
Do you think is that all?
Download the Oladance APP to enjoy more customization and cool features. Let’s have fun with your Oladance Wearable Stereo!
How to wear it?
- Pick up
- Rotate along the ear curve
- Check fit
- You are all set
Basic Parameters
- Product name Oladance Wearable Stereo B1
- Product model OLA02
- Bluetooth version Bluetooth 5.2
- Bluetooth protocol HFP/A2DP/AVRCP
- Charging interface Туре-с
- Charging time 2 Hours 210m
- Bluetooth communication distance 210m
- Working frequency 2402-2480MHz
- Rated power 15mW
Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage.
Battery Warning
The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded, or put into fire. The battery under very low air pressure may result in an explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert an explosion. Don’t use the battery continuously in case of serious ballooning.
The battery shall be handled pursuant to the local regulations and shall not be disposed of as household garbage. Don’t try to repair, remove, or refit the battery. The explosion may happen if the battery is replaced by the one subject to an incorrect model. Don’t compress or puncture the battery with hard objects. The battery leakage, overheating, or outbreak of a fire may occur if the battery is destroyed.
Declaration of Conformity:
Hereby, Shenzhen Dancing Tech Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.oladance.com SAR: RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN 62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC)
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Warning
- Don’t place the product into a liquid environment or avoid the product exposed to high humidity
- Avoid extrusion to avert damage to the product
- Don’t attempt to dismantle the product. Put the product in a cool and dry place to keep it dry if stored for a long time
- Avoid touching the strong magnet to prevent the magnetic headset from being demagnetized.
- Avoid the dusty, wet, and dirty environment where the electronic circuit of the equipment may be damaged if being used.
- Don’t Use the equipment at the moment of a thunderstorm because the thunderstorm may incur equipment faults or shock hazards.
- Don’t use the equipment when riding a motorcycle or a bicycle, driving a car, or crossing the road to ensure your safety.
- Keep the equipment out of reach of children or pets to avert damage.
- Don’t wash the equipment with chemical cleanser or strong detergent