Maytag W11084656 Dishwasher Water Pump Fits Whirlpool User Guide
Step 1. Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks, and other hard items from dishes. Remove labels from containers before washing.
NOTE:
- Make sure when the dishwasher door is closed that no items are blocking the detergent dispenser.
- Items should be loaded with soiled surfaces facing down and inward toward the spray, as shown in the graphics above.
- Avoid overlapping items like bowls or plates that may trap food.
- Place plastics, small plates, and glasses in upper rack.
Step 2. Add Detergent
High-quality premeasured tablets and packs are recommended for improved performance.
Step 3. Add Rinse Aid
- Check the rinse aid indicator with the door down (varies by model).
- Add rinse aid to hinged lid-style dispenser by twisting the rinse aid cap 1/4 turn clockwise to open and lift off.
- Replace the rinse aid cap and turn to “Lock”.
- To add rinse aid to sliding lid-style dispenser, open the rinse dispenser lid by gently pushing in the center of the lid with your thumb and pulling up on the edge.
Step 4. Select Cycle & Option(s)
Please refer to Cycles & Options chart for more detailed description.
Filter Cleaning
To remove filter, pull out lower rack, grasp Filter Cup and rotate counterclockwise. Pull up to remove. Remove the Filter Plate. Rinse both under cold water in sink.To install filter cup, push down through opening. Turn clockwise to seat. Filter cup will click in to place when seated properly. Do not operate dishwasher with loose or missing filters.
Adjusting Racks
You can raise or lower the middle rack to fit tall items in either the middle or bottom rack. Adjusters are located on each side of the middle rack.
To raise the rack: Press both rack adjuster thumb levers and lift the rack until it is in the up position and level.
To lower the rack: Press both rack adjuster thumb levers and slide the rack to its down position and level.
NOTE: The middle rack must be level.
Height Adjustments (on some models)
