Euhomy IM-01 Ice Maker Countertop Machine User Manual

Euhomy IM-01 Ice Maker Countertop Machine User Manual

Congratulations
Dear Customer, So lucky to meet you guys !!! Thanks for making a purchase on Euhomy! We hope to provide you with sincere service. If there is anything missing or wrong with your order If you have any questions about using our Ice Maker. PLEASE reach out to us. Email-(euhomy@hotmail.com) or Facebook-(@Euhomy.official). Euhomy team will answer your doubts online for 24 hours. Your satisfaction is our ultimate goal. We’d appreciate it if you could share your experience with other shoppers on Amazon. We’d love to make it right for you! If you just want to see the problem description, you can directly see the tenth page, Or contact us directly. Email:euhomy@hotmail.com Our Mission: To be the most trusted appliance brand, create compact and practical appliances to better your life.

SAVE THESE INSTRUCTIONS / For Household Use Only

BASIC SAFETY PRECAUTIONS

• Do not use this appliance near water.
• Clean only with a damp cloth.
• Do not block any ventilation openings.
• Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the appliance.
• Do not attempt to modify or extend the power cord of this appliance.
• Unplug this appliance during lightning storms or when it will not be used for long periods of time.
• Unplug this appliance before cleaning it.
• Make sure that the available AC power matches the voltage requirements of this appliance.
• Do not handle the plug with wet hands. This could result in an electric.
• Unplug the power cord by holding the plug, never by pulling the cord.
• Do not turn the appliance on or off by plugging or unplugging the power cord.
• Turn off the appliance before unplugging it.
• Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain, moisture, dripping, or splashing, and no objects filled with liquids should be placed on top of it.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Do not use your ice maker outdoors. Place the ice maker away from direct sunlight and make sure that there is at least four inches of space between the back of your unit and wall. Keep a minimum distance of four inches on each side of your unit free.
• Do not use liquids other than water to make ice cubes.
• Do not use liquids other than water to make ice cubes. Do not clean your ice maker with flammable fluids. The fumes can create a fire.
• Do not tip over.

DANGER

Failure to follow these instructions can result in electric shock, fire, or death.

• Keep ventilation openings in the ice maker clear of obstruction.
• Do not damage the refrigerant tubing when handling, moving, or using the ice maker.
• Never allow children to play with or operate the ice maker.
• Unplug the ice maker before carrying out user maintenance on it.
• If a component part is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard.
• Follow local regulations regarding disposal of the ice maker due to flammable refrigerant and gas. All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.
• This ice maker is intended to be used in households and similar environments.
• We do not recommend the use of an extension cord with this appliance. If you must use an extension cord, use one with a minimum of 14 AWG wiring and rated at no less than 1875 Watts.

AVOID THE USE OF AN EXTENSION CORD

Improper use of grounded wire can result in the risk of electric shock. Consult an electrician if necessary. Do not attempt to defeat this safety feature by modifying the plug.

• Avoid the use of an extension cord because it may overheat and cause a risk of fire. However, if it is necessary to use an extension cord: Use only 3-wire extension cords with a 3-blade grounding plug. The marked rating of an extension cord must be equal to or greater than the rating of this appliance.
• It should be positioned such that it does not drape over the counter or tabletop where it can be pulled on by children.

OPERATION & INSTALLATION

BEFORE FIRST USE 

This portable ice maker uses a fully automatic control system, with an advanced microcomputer for easy and convenient ice-making. Making ice is simple and fast. Just add water, plug into an outlet, and press the ON/OFF button. You can select one of the two ice cube sizes with the touch of a button. When first turning on the unit or during ice-making cycles, the compressor will stay idle for 3 minutes, while energizing. There are warning indicators that alert you to fill the water when the reservoir is empty and to remove ice when the storage basket is full. The ice maker also has built-in safeguards that can limit accidental damage, automatically shutting down the system when necessary.

NOTE

• The incline angle of the ice maker cabinet should not exceed 45˚ during transportation or use. Do not turn the icemaker upside down. Inverting the ice maker could cause the compressor or refrigerating system to operate incorrectly. When the ice maker is moved or transported, please allow time for the fluids in the compressor to settle. Before using the ice maker for the first time, please wait 2 hours after the unit has been leveled and positioned in its proper place.
• Please ensure the ice maker is level and on a stable table or platform to avoid malfunction.
• The machine must be placed on a dry and level surface with sufficient ventilation, far from heat sources such as ovens, heaters, and corrosive gases. Leave an 8″ (20 cm) clearance on all sides of the ice maker for proper ventilation.
• Do not fill the water reservoir with hot water. This may damage the ice maker. It is best to fill the water reservoir with water at room temperature or lower. Please ensure the ice maker is level and on a stable table or platform to avoid malfunction.

PREPARING YOUR ICE MAKER

1. . Remove the exterior and interior packaging. please contact customer service.
2. Remove the tape holding the ice scoop and ice basket.
3. Make sure that the ice basket and ice scoop are inside. If any parts are missing,
4. Clean the tank and ice basket with diluted detergent, warm water, and a soft cloth.
5. Allow one hour for the refrigerant fluid to settle, then plug the ice maker into a grounded wall outlet.

USE YOUR ICE MAKER

1. Prior to using your ice maker each time, wipe out the interior with a clean, damp cloth.
2. .Making Ice Ensure that the drain plug underneath the front of the unit is closed and the water tube screen is in place.
3. Plug the ice maker into the wall outlet and the green power indicator light.
4. Open the cover and remove the ice basket.
5. Fill the water reservoir. NOTE: do not fill above the max water level mark at the back of the
6. Press the ON/OFF button and the green POWER LED will light signifying that the unit is
7. Replace the ice basket and close the cover. on. To change between either the small or large ice size, press the SELECT button until the desired ice size is indicated.

NOTE

• If the room temperature is below 60° F (15.6° C), select the SMALL ice cube size to prevent the ice cubes from sticking together Press and hold the SELECT button for five seconds to run 8 continuous cycles, even when the ICE FULL indicator is on.
• The ice-making cycle will last approximately 8-13 minutes depending on the ice size that is selected. The ice-making cycle starts with water being pumped into the Water Tray situated below the Evaporator Fingers. Over the next 8-13 minutes ice forms on the Evaporator Fingers. Once this has been completed, the Ice Tray will tilt backward and the remaining water in the Ice Tray is drained back into the Water Reservoir. The ice cubes are then dropped from the Evaporator Fingers and pushed forward into the Ice Basket by the Ice Shovel. The Ice Tray will automatically move back into position under the Evaporator Fingers and start the next cycle.
• The ICE FULL LED light will light up when the ice basket is full and the Ice Maker will stop the ice-making cycle automatically. Gently remove the ice from the Ice Basket with the Ice Scoop. Once the Ice Basket has been emptied and the Cover closed, the Ice Maker will restart its ice-making function automatically.
• The ADD WATER LED light will light up when there is no more water in the Water Reservoir, and the ice-making cycle will stop automatically. Press the Power Button once (the Power Button will flash every 5 seconds), remove the ice basket, and add water to the Water Reservoir.

Maintenance

Your ice maker is designed for year-round use with only minimal cleaning and maintenance. When you first receive it, wipe the outside with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your ice maker looking new.

Tips & Suggestions

• Stop the ice-making cycle by pressing the POWER button. the green LED light will go out, indicating the ice maker is off. Unplug the Ice Maker from the wall outlet and allow the unit to warm up to room temperature.
• If the Water Tray is not in the vertical position behind the Evaporator Fingers, gently push the Water Tray back so that all water drains into the Water Reservoir.
• Open the Drain Plug to drain out excess water.
• Remove the Ice Basket.
• Remove the Water Tube Screen and rinse under running water.
• Clean the Ice Maker interior with a soft cloth dampened in warm water and vinegar. Rinse with a clean, damp cloth.
• Replace the Drain Plug and the Water Tube Screen. Wash the Ice Basket and Ice Scoop in warm soapy water. Rinse and dry.
• Clean the exterior of the Ice Maker with a soft, damp cloth. Use a mild dishwashing soap if necessary.
• Do not clean the Evaporator Fingers.
• Locate your ice maker in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.

WARRANTY

Euhomy offers a limited 1-year warranty (“ warranty period” ) on all of our products purchased new and unused from Euhomy company, with original proof of purchase, and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period. The warranty does not apply where damage is caused by other factors, including without limitation:

• (a) normal wear and tear;
• (b) abuse, mishandling, accident, or failure to follow operating instructions;
• (c) exposure to liquid or infiltration of foreign particles;
• (d) servicing or modifications of the product other than by Euhomy;
• (e) commercial or non-household use

The Euhomy warranty covers all costs related to restoring the proven defective product through repair or replacement of any defective part and necessary labor so that it conforms to its original specifications. A replacement product may be provided instead of repairing a defective product. Euhomy’s exclusive obligation under this warranty is limited to such repair or replacement. A receipt indicating the purchase date is required for any claim, so please keep all receipts in a safe place.

Although greatly appreciated, product registration is not required to activate any warranty, and product registration does not eliminate the need for the original proof of purchase. The warranty becomes void if attempts at repair are made by non-authorized third parties and/or if spare parts, other than those provided by Euhomy, are used. You may also arrange for service after the warranty expires at an additional cost. These are our general terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless of warranty terms. If you have an issue with a Euhomy product, please contact us (euhomy@hotmail.com), and we will do our best to resolve it for you.

TROUBLESHOOTING GUIDE

REFERENCE LINK

https://euhomy.com/