Table of contents
show
Taotronics TT-BH053 TWS Wireless Bluetooth Earbuds User Guide
PACKAGE CONTENTS
- TaoTronics True Wireless Stereo Earbuds (TT-BH053)
- 8 x Ear Tips (two are equipped on the earbuds)
- 1 x USB Charging Cable
- 1 x User Manual
- 1 x Quick Start Guide
PRODUCT DIAGRAM
- Multifunction Touch Control
- LED Indicator
- Microphone
- Charging Contacts
- Micro USB Charging Port
- Charging Case
- Charging Indicator
- Charging Slot
IMPORTANT SAFETY INSTRUCTIONS
Please read the instructions thoroughly before using this product and retain it for future reference.
Hearing Safety
- Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
- Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
- Do not set volume too high to stay aware of your surroundings.
- Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
- For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers.
HOW TO WEAR
Choose the Right Tips (Fig. 3)
Ear tips with different sizes are included in the package, try all sizes and choose the ones fitting you best.
Wear the Earbuds (Fig. 4)
Please wear the earbuds as shown below
Bluetooth Caution
- When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
- The maximum effective Bluetooth range is 10 meters (33 feet), which may vary with the environmental circumstances.
- When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.
USING YOUR EARBUDS
Charging the Earbuds
- Put the earbuds into the charging case as per the L (left) and R (right) marks (Fig. 5).
- Charging will start automatically. The LED indicator will flash blue slowly when charging and turn off when charging is completed (Fig. 6).
Charging the Case
- Connect the charging port with any USB charging adapter or active computer USB port. (Fig. 7)
- The four charging indicators will light up progressively.
Restore to Factory Settings
If you failed to pair your device with the earbuds, please restore them to factory settings as instructed below:
- Take the earbuds out of the charging case, then place them back again. Tap and hold the Multifunction Touch Control of both earbuds for 10 seconds until the LED indicators flash three times to enter reset mode.
- If you have paired your device with the earbuds before, remove “TAOTRONICS Sound Liberty 53” from the bluetooth device list and pair again.
- Take out both earbuds, and they will pair with each other automatically. Pair them with your device when the LED indicator on the right earbud flashes blue and that on the left earbud flashes blue and white alternately.
Note:
If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or clear “TAOTRONICS Sound Liberty 53” from its Bluetooth list. Restore the earbuds to factory settings as instructed above if pairing failed.
OPERATION AND FUNCTIONS
| Function | Operation | Voice Prompt |
| Play / Pause | Tap the Touch Control on either of the earbuds twice | / |
| Volume + | Tap the Touch Control on the right earbud | Toots when highest setting is reached |
| Volume – | Tap the Touch Control on the left earbud | Toots when lowest setting is reached |
| Next Track | Tap the Touch Control on the right earbud three times | / |
| Previous Track | Tap the Touch Control on the left earbud three times | / |
| Answer Phone Call | Tap the Touch Control on either of the earbuds once | Ring tone sounds when call is incoming Toot when Connected |
| Hang up Phone Call | Tap the Touch Control on either of the earbuds twice | Toot |
| Decline an Incoming Call | Tap and hold the Touch Control on either of the earbuds for 2 seconds | Toot |
| Turn On / Off Voice Control | When paired successfully, press and hold the Touch Control on either of the earbuds for 2 seconds until a beep is heard. |
Toot |
TROUBLESHOOTING
| No. | Problem | Solution |
| 1 | Failed to turn on the earbuds | Earbuds low battery, please charge them |
|
2 | Failed to charge the earbuds |
|
| 3 | Can’t charge the charging case | Make sure the charging cable is intact and plugged in properly |
|
4 |
Can’t find “TAOTRONICS Sound Liberty 53” in the Bluetooth device list | The earbuds reconnected with previously paired device automatically:
|
| 5 | Failed to pair the earbuds with your device |
|
| 6 | No sound in one of the earbuds in couple earbuds mode | Place both earbuds back to the charging case then take them out, they will pair with each other automatically. If pairing failed, restore them back to the factory settings as instructed in the “Restore to Factory Settings” section |
CLEANING AND MAINTENANCE
- Clean the earbuds and the charging case on a regular basis.
- Use dry and soft cotton cloth to wipe the unit.
- Keep away from sharp objects to avoid scratches.
- Put the unit in a dry and shady place if it is to be idle for a long time.
- Do not clean the product with detergent or chemicals.
