Urbanista Malibu Solar Powered Bluetooth Speaker User Manual
Product Overview
WELCOME TO URBANISTA
Thank you for choosing Urbanista Malibu. This guide will help you get the most out of your new speaker.
FIRST CONNECTION AND RECONNECTION
- Power on the speaker by pressing the Power button.
- Enable Bluetooth on your device and select ”Urbanista Malibu” from the list.
- The LED will turn solid upon a successful connection. Next time you power on the speaker, it will attempt to reconnect to the last connected device. In case of failure, it will automatically enter pairing mode. Double-press the Power button to disconnect from an already connected device and enter pairing mode.
BUTTON CONTROLS
- Play/Pause: Single press
- Volume Up: Single press
- Volume Down: Single press
- Next track: Long press
- Previous track: Long press
- Enable/Disable power saving mode: Long press
- Stereo pair: Double press
- Turn on: Single press (1s)
- Turn off: Long press (3s)
- Check battery status: Single press
- Enter pairing mode: Double press
- Reset device settings: Long press (10s)
POWERFOYLE™ LIGHT CHARGING
Urbanista Malibu utilizes Powerfoyle™ light charging technology to continuously charge its battery when exposed to indoor and outdoor light. It is recommended to store the speaker in a sunlit area, such as a windowsill, when the speaker is not in use, Remember, stronger light yields more effective charging.
POWER SAVING MODE
Activating Power Saving Mode will extend the speaker’s playtime, with the duration dependent on factors such as content, volume, and environmental conditions.
BATTERY
A ”low battery” alert activates when the battery falls below 20%. In such cases, it’s advisable to use a standard USB Type-C cable for charging. While charging, the LED indicates battery status as following
- 0-30%: Amber LED pulses
- 30-100%: White LED pulses
- 100%: Solid white LED
To check the battery level, simply single-press the Power button. The LED turns amber if the battery level is below 30% and solid white if it exceeds 30%.
AUTOMATIC POWER-OFF
The speaker will automatically power off after 5 minutes of disconnection or 30 minutes of inactivity while connected. In Power Saving Mode, it will power off after 15 minutes.
STEREO PAIRING
For enhanced sound, follow these steps to connect two Malibu speakers:
- Connect Speaker A to a Bluetooth device.
- Power on Speaker B, but do not connect it to any device.
- Double-press the Feature button on both speakers.
- Both speakers’ LEDs will flash rapidly, and once connected, turn solid.
- To stop stereo pairing, double-press the Feature button on either speaker.
USING THE APP
Enhance your experience with the Urbanista Audio app, available on both the App Store and Google Play. The app allows you to monitor light charging performance, personalize sound settings, and customize your speaker.
IP67 WATER AND DUST RESISTANT
IP67 means the device is dust- and waterproof up to 30 minutes in 1 meter water depth. Important Safety Precaution: To avoid the risk of electric shock, please do not use your speaker near water when charging with cable.
FACTORY RESET
To reset to factory settings, press the Power button for 10 seconds while powered off. The LED will begin flashing, and after restarting, the speaker will automatically enter pairing mode. Remember to remove ”Urbanista Malibu” from your Bluetooth settings before re-pairing.
NEED SUPPORT?
For further assistance and FAQs, please visit www.support.urbanista.com.
REFRENCE LINK
