TWS EP009 Wireless Bluetooth Earbuds User Manual

TWS EP009 Wireless Bluetooth Earbuds User Manual

Safety Precautions

Please read follow and keep these instructions:

1. Keep the device out of extreme heat and humid
2.  Power time may different depending on personal habits
3.  Heed all warnings on the product and in the operation instructions
4.  Do not listen at high volume level for long period to protect hearing
5.  Stop using this product immediately if it causes discomfort or pain

Inside the box

1. Bluetooth Headset X 2PCS
2. Charging Case X1 PCS
3.  USB lightning charging cable X1 PCS
4. User Manual X1 PCS

Functional Diagram

TO CHARGE CHARGING CASE

1. Connect the lightning cable to lightning port on the charging case
2. Plug the USB connnector of the cable into a USB Power source
3. The indicator light will show RED while the charging case is charging,Depending on the power delivered to the charging case, the charging case will take approximately 2 hours or more to completely charge
4. The indicator light will go solid blue, then blink, then turn off when the case is fully charged

TO CHARGE EARPHONES

1. Put the earphones in the charging case correctly, charging case will start to charging automatically
2. The indicator light on the earphones will turn RED while charging
3. The indicator light on the earphones will turn OFF when fully charged

POWER ON

Press and hold the multi-function key on BOTH L and R earphone for 3 seconds simultaneously, release when the BLUE light is on with a voice prompt:“POWER ON”

PAIRING

1. When power on, L and R earphones will connect each other automatically and sound with a voice prompt: “
   CONNECTED” , and the indicator lights of R earphone will flash blue and red with a voice prompt: “PAIRING”, While blue indicator light of L earphone flash slowly (*)
2. Enable the bluetooth pairing mode on your phone device. Tap on “Air plus” to connect.
3. Earphones will response with a voice prompt:“DISCONNECTED” when bluetooth signal is cut off, and shutdown 5 mins later automatically
4. When power on,the earphones will connect the last paired mobile automatically. If not, pls repeat step 2.

SINGLE EAR FOR INDEPENDENT USE

1. Press and hold the multi-function key for 6 seconds on either earphone (base on your personal preference), release when the red and blue light flash alternately
2. Enable your phone’s Bluetooth pairing function and search for the “Air plus”to pair and connect

POWER OFF

1. TWS mode (Due-ear)Press and hold the multi-function key on either earphone for 3 seconds.
2. Independent use mode (Single Ear, L or R)Press and hold the multi-function key on the used earphone for 3 seconds.
3. Put the earphones in the charging case correctly, will auto shutdown The battery status of earphones is visible on connected devices, when it’s running out of power, the earphones will remind you with a voice prompt: “LOW BATTERY, PLEASE CHARGE”, pls recharging in time

PHONE & MUSIC

• To Answer A Call: Press the multi-function key of the right earphone one short
• To End A Call: Press the multi-function key of the right earphone one short. Voice response tone“call ended”
•  To Reject A Call: Press and hold the multi-function key of the right earphone for 1s. Voice response tone“call rejected”
•  To Redial A Call: Press the multi-function key of the right earphone twice, Voice response tone “redialing”
•  To Play the next song: Press and hold the multi-function key on either earphone for 2s

Specification