Table of contents
show
Sharper Image Smart Wearable Assistant Hands-Free Bluetooth Speaker Phone User Guide
Precautions
- Please only use the computer USB or the DC 5V power matching the Micro USB interface to charge.
- Please keep and use in normal environments. Exposure to fire, water, or other extreme elements may damage the unit. Do not handle with wet hands.
- Keep debris or other items from blocking the device or from entering any of the ports.
- Do not attempt to open or take apart this device. Device will be damaged during that process.
- Do not submerge the product in water.
- Keep device away from any heat source.
- Adjust volume to avoid damaging your hearing
PARTS
- Multi function button: play, pause, answer call, Siri, etc.
- MIC
- Charging port
- LED indicator
- Speaker
- ON/OFF
- Volume +/– (remote camera function)
Easy Operation
Play/Pause/Answer Call/Siri, etc.
- Answer/Hang Up: single click to answer, single click again to end.
- Play/Pause: hold down for two seconds to pause music, and hold down for another two seconds to replay.
- Siri, etc.: double click to activate intelligent assistant, single click to close it.
- Redial: triple click to redial the last outgoing number, press again to end call.
Charging Port
You should fully charge the speaker prior to first use. Plug the charging cable into the micro USB port and then connect the charging cable to the USB port of your PC or other compatible power source. TOKK™ will automatically turn off when USB is plugged to charge, and will automatically recover to the previous state once the USB is unplugged.
LED Indicator
- When power is on, LED light shows device is turned on.
- Blue LED light fast flashing indicates search to pair.
- Blue LED light slowly flashing indicates successfully paired.
- Red LED light steady on indicates that device is in charging mode.
- Red LED Light disappear when fully charged.
- Low battery: an alarm will sound three times to indicate the last 20 mins and 5 mins of battery power, along with a red & blue LED light flashing slowly
Power On/Off Button
- Slide this button to turn On/Off.
- It is strongly recommended to turn off the speaker while not in use.
- When TOKK™ and phone are disconnected over 10mins,TOKK™ will automatically power off to save power. You will need to switch it Off and On again to reactivate.
Volume (+/–) (Remote Camera Function)
- Short slide (+) to increase the volume, slide & hold (+) to forward to the next song.
- Short slide (–) to decrease the volume, slide & hold (–) to play the previous song.
- In camera mode, short slide (+, –) to activate remote camera function.
Bluetooth Pairing
Please ensure the device to which you are pairing with has Bluetooth® capabilities.
- Make sure that the TOKK™ is turned off.
- Place the TOKK™ and the paired device in proximity so that both devices are in view.
- Switch Power Button on until power is ON. A blue LED light will flash rapidly.
- To activate the Bluetooth® mode and functions on your phone or device, see the instructions for that device.
- Set the phone or device to search for Bluetooth® devices and select the TOKK™.
- When the pairing is complete, the blue LED light will flash slowly. The speaker is now ready for answering calls, listening to music.
Main Features
- Magnetically attaches
- Voice dialing
- Voice control
- Voice dialing through Siri, etc.
- Active noise cancellation
- Single MIC
- Bluetooth hands free
- Remote camera function
- Rechargeable battery
Specifications
- (Rated power) PO=1.5W
- (Frequency response) 180HZ-16KHZ
- (Distortion factor) THD<1%
- (Signal-to-noise ratio) S/N≥90DB
- (Separation) ≥55dB
- (Speaker) 23mm;4Ω 1.5W
- (Playing time) 150-180 mins
Trouble Shooting
No Sound
- Make sure that the music player is working and the device is charged.
- Make sure the Bluetooth is paired with the correct device.
Not Charging
Check to make sure that you are using the correct cable and that it is fully plugged into both the device and the USB port that you are charging from. Also check to make sure the PC or other USB charger is turned on.
