Sharper Image Alarm Clock on Wheel User Manual
CLOCKY’S BUTTONS
WARNING!
- Clocky is not a toy. Children should be supervised when he is in use.
- Clocky should sit on a nightstand no higher than 3 feet.
- Place barriers so that Clocky does not fall down stairs or balconies.
- Clocky should not be thrown. Let him roll off the table by himself.
- Clocky’s wheels can be stopped at any time by pressing the alarm bell button
- Clocky should not be placed in such a way that he can knock down liquids.
Install batteries
Turn Clocky around and unscrew the battery door using a small screwdriver. Insert 4 lithium AAA batteries. Follow the labels printed inside the battery compartment to install the batteries in the right direction.
Select 12 or 24 hour mode
To switch between 12 and 24 hour mode, press and hold the ‘t button for 3 seconds. To distinguish between AM and PM in 12-hour mode, note the presence or absence of the PM sign.
Set Time
Press the ‘t button once. The current time screen will start flashing. Use the ‘h’ and ‘m’ buttons to advance hours and minutes to the current time. To advance hours and minutes faster, press and hold the ‘h’ or ‘m’ buttons. To leave set time mode, press the ‘t’ button again or wait until the screen stops flashing.
Set Alarm Time
Press the ‘a button once. The alarm time screen will start flashing. Use the ‘h’ and ‘m’ buttons to advance hours and minutes until the desired alarm time is reached. To advance hours and minutes faster, press and hold the ‘h’ or ‘m’ buttons. To leave set alarm mode, press the ‘a’ button again or wait until the screen stops flashing.
Set Snooze Time
Press the a button twice rapidly. When your snooze is 0, Clocky will move as soon as it’s alarm time, but if it is enabled (1-9) then you must hit the snooze button before it rolls away. Press the ‘m’ button to change this. If 1 is chosen you can snooze for one minute. If 2 are chosen, you can snooze for two minutes, and so on up to 9 minutes. To leave this mode, press the a’ button again or just wait until the screen stops flashing.
Turn Alarm On/Off
Press the alarm on/off button. A corresponding icon will show up on the screen to indicate that the alarm state is on/off. You will also use this button to stop the alarm and wheels after Clocky’s alarm sounds.
Turn Wheels On/Off
Press the wheels button to turn the wheels on/off. A corresponding icon will show up on the screen when the wheels are on/off. Read the full manual here: https://clocky.com/pages/manual Need extra help? Check: https://clocky.com/pages/faq-support
REFERENCE LINK
https://www.sharperimage.com/view/product/Alarm+Clock+on+Wheels/207718
