Table of contents
show
8bitdo Ultimate Wired Controller for Xbox User Manual
8bitdo Ultimate Wired Controller for Xbox
Connectivity
Xbox Series X / Xbox Series S / Xbox One
- Connect the controller to your Xbox Series X/S and Xbox One via its USB cable, and wait till the status LED becomes solid to play.
Windows 10
- Connect the controller to your Windows device via its USB cable, and wait till the status LED becomes solid to play.
- Required system: Windows 10 1903 or above.
Button swap
- Press and hold any two of A/B/X/Y/LB/RB/LSB/RSB buttons you would like to swap
- Press the star button to swap them, profile LED blinks to indicate the success of the action
- Press and hold any of the two buttons that have been swapped and press the star button to cancel it but visits more back to it de tutoring Further infrmatin off.
Volume control
- Beeps when adjusted to maximum/minimum
- Vibration when adjusted to the middle value
- Press and hold profile + up/down to turn up/down in-game volume
- Press and hold profile + left/right to adjust the balance between voice and game volume
Ultimate Software
- 8BitDo Ultimate Software gives you elite control over every piece of your controller: customize button mappina. adiust stick & trigger sensitivity. and control vibration power
- Please visit app.8bitdo.com for the application
- Profile LED lights up when profile is enabled
REFERENCE LINK
https://www.8bitdo.com/ultimate-wired-controller-for-xbox/