NUPHY Air60 V2 Wireless Mechanical Keyboard User Manual

NUPHY Air60 V2 Wireless Mechanical Keyboard User Manual

System Selection

• Win mode
• Mac mode

Connection Mode Selection

• Power Off
• Wired mode
• Wireless mode
• In the wired mode, it is necessary to use a data cable to connect to the device.

Wireless Device Connection

• FN + Q / W / E / R = Bluetooth 1 / Bluetooth 2 / Bluetooth 3 / 2.4Ghz

Short press to switch between devices; long press 3 seconds to enter pairing mode. Plug the 2.4G receiver into your computer after pressing FN + R.

Power

• Power 1% ~10%
• Power 11% ~95%
• Power 96% ~ 100%
• Sleepmode On
• Sleepmode Off

Backlight Settings

• FN + ^/V Brightness + –
• FN + ‹ Backlight effect switching
• FN +› Backlight color switching

Sidelight Settings / RGB

• FN + M + ^~ Sidelights brightness + — / RGB
• FN + M +‹ Sidelight effect switching / RGB
• FN + M +› Sidelight color switching / RGB
• FN + M + </> Sidelight speed – + / RGB

Sleep Mode Setting

• FN +) Turn the Sleep mode on or off.

If there is no operation on the keyboard, it will turn off the light and enter sleep mode after 6 minutes.

Other Key Combos

• FN +\ Enable/disable permanent battery level display

Factory Reset

FN + [ Long press for 3 seconds to restore factory settings.

VIA keymap configurator / VIA

VIA is open-source software developed independently from NuPhy and released under open-source licenses. To obtain the latest VIA releases please visit nuphy.com/pages/console. If for any reason your keyboard cannot be detected by VIA under the wired mode, feel free to contact our technical support.

• Mac Mode: LAYER 0 / 1
• Win Mode: LAYER 2 / 3

REFERENCE LINK