Table of contents
show
Nuphy Air75 V2 Wireless Custom Mechanical Keyboard User Manual
System Selection
- Win mode / Win 1st / Win E – F / Win 25
- Mac mode / Mac #it / Mac E – F / Mac 25
Connection Mode Selection
- Power Off
- Wired mode
- Wireless mode
In the wired mode, it is necessary to use a data cable to connect with the device.
Wireless Device Connection
FN @ 2 # 3
- FN + 1 / 2 / 3 / 4 = Bluetooth 1 / Bluetooth 2 / Bluetooth 3 / 24Ghz
- Short press to switch between devices; long press 3 seconds to enter pairingmode. Plug the 2.4G receiver into your computer after pressing FN + 4.
Backlight Settings
FN ^ < FN
- FN +^/~ Brightness + –
- FN + Backlight effect switching
- FN +› Backlight color switching
- FN +</> Backlight speed – +
Sidelight Settings
RB 18 705 FN ^ < > FN
- FN + M +^/~ Sidelights brightness + –
- FN + M + Sidelight effect switching RGB+1 F51
- FN + M +> Sidelight color switching
- FN +M + </> Sidelight speed – +
Sleep Mode Setting
FN ]
- FN +1 Turn the Sleep mode on or off
If there is no operation on the keyboard, it will turn off the light and enter sleep mode after 6 minutes.
The screenshot shortcut
FN
- (mac) Section screenshot
- FN +§J (mac) Full screen screenshot
- EJ (win) Full screen screenshot
Other Key Combos
FN
- FN + 1 Enable/disable permanent battery level display
Factory Reset
FN { [
- FN + [ Long press for 3 seconds to restore factory
VIA keymap configurator
VIA is open source software developed independently from NuPhy and released under open source licenses. To obtain the latest VIA releases please visit nuphy.com/pages/console. If for any reason your keyboard cannot be detected by VIA under the wired mode, feel free to contact our technical support.
REFRENCE LINK
