LG MF71 360 Degree Magnetic Work Light User Manual
Precautions for Use
- Do not install the product in a place exposed to dust, moisture, heat, oil, or direct sunlight.
- Be careful not to get the camera wet. There is a risk of short circuiting if liquid gets on the camera.
- Wipe gently with a dry cloth to remove the dust. If the product is very dirty, spray a mild detergent on the cloth and then wipe the product. (Do not use any volatile substances such as thinner, alcohol, or benzene. Doing so may cause damage to the product surface or deterioration of function.)
- Do not pull on the cable.
- The presence of an electromagnetic product (wireless communication devices such as Wi-Fi and Bluetooth) nearby may affect the operation of the camera.
- Please be cautious as the camera may fall when it is not securely fixed and installed, or when the TV is tilted. Impact may result in product damage.
In the Box
Parts Description
Specification
| Model | VC23GA | ||
| Size (width x height x thickness) | 80 mm x 35.4 mm x 23.1 mm (3.1 inches x 1.39 inches x 0.9 inches) | ||
| Weight | 38 g (0.08 lb) | ||
|
Video | Lens | Focus | 56 cm (22.0 inches) or more |
| Visual range | 76.9° diagonally | ||
| Pixels | 1920 x 1080, 30fps | ||
| Output format | MJPEG, YUV2 | ||
| Output image | FHD, HD, VGA, QVGA | ||
| Audio | MIC | 2 | |
| Interface | USB Type-C (USB2.0) | ||
| Power | DC 5 V, max. 500 mA | ||
| Supported models | Smart TV operating system of webOS22 or later | ||
| Environmental conditions | Operating temperature (Humidity) | 0 °C – 45 °C / 32 °F – 113 °F (0 % – 80 %) | |
| Storage temperature (Humidity) | -10 °C – 65 °C / 14 °F – 149 °F (0 % – 90 %) | ||
FCC Compliance Statement
This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by using one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
