Nokia BH-605 Wireless Power Earbuds User Manual

Nokia BH-605 Wireless Power Earbuds User Manual

What’s in the box

• USB Type-C cable
• Quick Start Guide

Product Overview

Charging case:

1. Charging contacts (R)
2. Charging contacts (L)
3. Battery status LEDs
4. USB Type-C port

Earbuds:

1. Touchpad
2. LED indicator light
3. Microphone
4. Ear tip

Get started

Before sis backin he earsince Then connect nets ayes andeloa power source to begin charging. Fully charge the earbuds and the charging case before the first use.

• Earbuds LED indicator lights turn red when charging, and turn off when fully charged. If the earbud is low in battery power, the LED indicator light will keep flashing red.
• For optimal fit and audio performance, replace the ear tips with the size that best suits you.

Pair and connect with Bluetooth

• Pairing with the device
• Turning on and Pairing:
  When you take the earbuds out from the charging case, the earbuds will turn on and pair with each other automatically. When they have successfully paired, the LED indicator light of the right earbud will flash blue and red alternately and the earbuds are ready to connect with your Bluetooth® device.
• Connecting with your Bluetooth device:
  Turn on Bluetooth in your device and choose “Nokia Power Earbuds” from the Bluetooth menu to connect. During the connection process, the LED indicator light on the right earbud will flash blue and red alternately.

The LED indicator lights of the earbuds will flash blue every 5 seconds when they are successfully connected via Bluetooth.

• After the initial pairing, the earbuds will automatically connect with your Bluetooth device whenever taken out of the charging case.
• The earbuds will automatically power off if there is no Bluetooth connection within 5 minutes.

Using your earbuds

• Touch control:…

Additional controls:

• Manually power on and off:
  Touch the touchpad of two earbuds for 3 seconds to manually power on; touch the touchpad of one earbud for 5 seconds to manually power off.
• Use single earbud:
  You can single use the right earbud. If the earbuds have been paired with your Bluetooth device before, the right earbud will automatically connect with your device when taken out of the charging case.
• Reset to the original settings:
  Put the earbuds back in the charging case (the LEDs will turn red) > Touch the touchpad of two earbuds for 5 seconds until the LEDs flash blue and red alternately for 3 times indicating that the reset is successful.

Product and safety information

Remote control functions may vary depending on the model of your device and application. Sound track instructions do not respond to iOS devices. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight. Bluetooth devices must, however, be within 10 meters (33 feet) of each other, although the connection may be subject to interference from obstructions such as walls or from other electronic devices.

• Frequency Band: 2400 MH2-2483 MH2
• Maximum Radio Frequency Power: -6-+4dBm

For your safety

Important: Read these simple guidelines. Not following them may be dangerous or against local laws and regulations. For further info, read the complete user guide.

• Switch off in restricted areas
  Switch the device off when a Bluetooth headset use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas.
• Interference
  All wireless devices may be susceptible to interference, which could affect performance. Batteries, chargers, and other accessories Use only batteries, chargers, and other accessories approved by HMD Global Oy for use with this device. Do not connect incompatible products.
• Protect your hearing
  To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Hearing
  Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.The surface of this product is nickel-free.
• Small children
  Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children.

Take care of your device

Handle your device with care. The following suggestions help you keep your device operational.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits.
• Do not use or store the device in dusty or dirty areas.
• Do not store the device in high temperatures. High temperatures may damage the device or battery.
• Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it.
• Do not open the device other than as instructed in the user guide.
• Do not drop, knock, or shake the device or the battery. Rough handling can break it.
• Only use a soft, clean, dry cloth to clean the surface of the device.
• Do not paint the device. Paint can prevent proper operation.
• The earbuds are featured with water protection level IPX7. Water protection level is not a permanent condition and can decrease over time.
• The charging case is not water resistant.

REFRENCE LINK

https://www.nokia.com/phones/en_int/support/nokia-power-earbuds-bh-605