SWANN S220 Wireless Video Doorbell User Manual
OVERVIEW
Thank you for choosing the Add-on Doorbell. It’s the ideal addition to your Alpha Series Home Alarm system. The Doorbell enables visitors to send a chime to your Indoor Alarm Receiver so you know that someone’s waiting at your doorstep. The Doorbell can also easily be carried around the home in your pocket and used as a help button. Please take a moment to familiarize yourself with key parts of the Doorbell.
BATTERY INSTALLATION
The Doorbell is powered by a CR2025 battery (supplied). To install the battery:
- Remove the screw securing the battery compartment cover using a small Philips® screwdriver.
- Rotate the battery compartment cover counter-clockwise until the arrow aligns with the Unlock position and lift off the cover.
- Place the new CR2025 battery in the battery compartment with the positive (+) side facing up.
- Replace the battery compartment cover rotating clockwise until the arrow aligns with the Lock position and fasten with the previously removed screw.
PAIRING WITH THE INDOOR ALARM RECEIVER
- The Indoor Alarm Receiver is now in pairing mode.
- Within 25 seconds, press the Doorbell button. The Doorbell Channel melody sounds with the Doorbell Channel LED indicator blinking on the Indoor Alarm Receiver to confirm successful pairing.
- If pairing is not completed within 25 seconds, the Doorbell Channel LED indicator goes off and the Indoor Alarm Receiver is no longer in pairing mode. Repeat steps above to pair the Doorbell again.
MOUNTING THE DOORBELL
The Doorbell can be mounted to the surface using the supplied mounting plate and adhesive tape. Avoid mounting the Doorbell on metal surfaces as this can reduce the operating range.
- Make sure the surface is dry, smooth and free of dust and other substances that could affect adhesion. Clean the surface with an alcohol/cleaning wipe, and let dry.
- Peel off the adhesive tape liner on the back of the Doorbell mounting plate, and then press the mounting plate firmly to the surface for 60 seconds to ensure solid adhesion.
- Slide the Doorbell down onto the mounting plate until it clicks into place.
LIMITED WARRANTY TERMS & CONDITIONS
LIMITED WARRANTY TERMS & CONDITIONSSwann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty validation. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres.
