Foscam VD1/DBW5 Video Doorbell Camera User Manual
Overview
Key Features
- 4.0 Megapixels Resolution, support HDR
- Supports WPA and WPA2 Encryption
- Support full duplex 2-way Audio
- Ultra-wide Angle lens, diagonal Angle up to 170°
- Supports AI algorithm (Face recognition)
- Support 2.4GHz & 5GHz dual-band WiFi
- Supports image snapshot
- Supports dual-stream
- Built-in High-efficiency IR LED, has excellent night-vision image
- Supports remote viewing & recording from anywhere anytime
- Multi-level user management with password protection
- Supports multiple network protocols: IP、TCP、UDP、FTP、DHCP、RTSP、
- Providing Video Management Software to manage or monitor multi-cameras
- Supports sound detection
- Supports Alexa
- Supports Google Home
- Complete mounting bracket and kit are available
- Supports 256G Micro SD Card Storage(External)
Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the QuickSetupGuide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended.
Packing Contents
| ● Video Doorbell × 1 | ● 5°Vertical angle bracket × 1 |
| ● 15°Horizontal angle bracket × 1 | ● Ethernet Cable× 1 |
| ● Thick mounting bracket × 1 | ● Mounting bracket× 1 |
| ● Type-c cable × 1 | ● Power Kit × 1 |
| ● Wire Extenders × 2 | ● Wire Nuts × 2 |
| ● Dual-purpose screwdriver × 1 | ● Silicone Plug × 1 |
| ● Quick Setup Guide × 1 | ● Drill Hole Position Template × 1 |
| ● Expansion Screws × 1 |
Physical Description
- Camera: Ultra-wide Angle lens
- Microphone: Built-in Microphone.
- Reset: Press and hold on the reset button for 10 seconds. Releasing the reset button, the password will back to the factory default administrator password.
- Micro SD Card slot: Supports up to 128GB SD card for storing the video.
- Power Input Port: AC wiring interface.
- Type-C Port: Use with C-type cable and 5V DC power distribution network.
- Speaker: Built-in speaker
- Security screw hole: Used to install anti-theft screws to prevent the doorbell from being stolen.
SD Card Management
This camera supports a Micro SD Card. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well. On the Foscam app go to the Settings Device Status Device Status page, and you can see the status.
Add Device: Connection via the FoscamApp
Scan the QR code below to download and install the Foscam APP
Please refer to the Quick Setup Guide. It is strongly recommended that you complete the “add devices” process on the Foscamapp before the doorbell hardware is installed. You can scan the following QR code to watch the added video
Installation
Please refer to the Quick Setup Guide. Note: Make sure you have installed the Foscam App, and have scanned the doorbell QRcode, and completed the “add device” process in the app before beginning the hardware installation process. You can scan the QR code below to search and watch the power kit installation video.
Default Parameters
Default network parameters
- IP address: obtain dynamically
- Subnet mask: obtain dynamically
- Gateway: obtain dynamically
Specification
| ITEMS | VD1 | |
| Image Sensor | Sensor Type | High Definition Color CMOS Sensor |
| Display Resolution | 4.0Megapixels(2560*1440) | |
| Min. Illumination | 0 Lux (With IR Illuminator) | |
| Lens | Lens Type | f.1.9mm ;F2.0 |
| Angle of view | Diagonal: 170°, Horizontal: 152°, Vertical: 81° | |
|
Video | Image Compression | H.264+/H.264 |
| Image Frame Rate | Max 25fps (2K) | |
| Resolution | 2K(2560*1440) 25fps,1080P(1920×1080) 25fps,720P(1280 x 720) | |
| Stream | Dual stream | |
| HDR | Support HDR | |
| Flip Image | Flip and mirror | |
| Infrared Mode | 1pcs 850nm SMD IR-LEDs | |
| Night Mode | Manual and automatic modes | |
| Night Visibility | 5m | |
| Audio | Input/Output | Build-in mic and speaker,support full duplex 2-way Audio |
| Audio Compression | AAC | |
|
Network | Ethernet | Transfer via USB type C to RJ45 |
| Wireless Standard | 2.4GHz&5GHz,IEEE802.11b/g/n/ac | |
| Wireless Security | WPA, WPA2 | |
| Remote Access | P2P | |
| Wifi configuration Mode | Support scan QR code , sound wave to add camera | |
| Network Protocol | IP, TCP, UDP, SMTP, FTP, RTSP, DHCP | |
| System Requirements | Operating System | Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app) |
|
Other Features | Motion Detection | Alarm via E-Mail, FTP and Foscam app when an event is detected |
| Sound Detection | Alarm via E-Mail, FTP and Foscam app when an event is detected | |
| Face Detection | Alarm via E-Mail, FTP and Foscam app when an event is detected | |
| Face Recognition | Face recognition of max 20 persons(support only with Foscam Cloud) | |
| Privacy Block | Yes | |
| Custom Ringtones | Support to customize exclusive ringtones through mobile APP | |
| HDR | Improve image clarity in complex scenario | |
| Zoom | 6X digital zoom function | |
| Storage | Support max. 256GB Micro SD card, local and FTP storage,Foscam cloud storage | |
| Visitors Leave a message | Support the push of guest messages to the APP | |
| Power | Power Supply | AC8~24V/USB C 5V/ DC12~30V |
| Power Consumption | 8 Watts (Max.) | |
| Physical | Dimension(LxWxH) | 115(L)x45 (W)x25 (H) mm |
| Net Weight | 125g | |
|
Accessories | Power Kit | 1pcs(work with existing electronic chime ) |
| Leveler | 1pcs(Pre-install the Leveler on the mounting plate) | |
| Mounting Bracket | Flat Mounting Plate*2pcs,Horizontal Wedge*1pcs,Vertical Wedge*1pcs | |
| Connector | U-type Connector*1pcs,Fork Connector*1pcs | |
| Doorbell Wire Extenders and Nuts | With 1pcs extra screw for backup (for AC power of Doorbell), pre-install 2 Wire Extenders on the Doorbell body | |
| L-shape Screwdriver | 1pcs | |
| Screws | Wall Mount Screws*1sets,Anti-theft Screws*2pcs | |
|
Environment | Waterproof | IP65 |
| Operating Temperature | -20°C~ 50°C (-4°F ~ 122°F) | |
| Operating Humidity | 20% ~ 85% non-condensing | |
| Storage Temperature | -20°C ~ 60°C (-4°F ~ 140°F) | |
| Storage Humidity | 0% ~ 90% non-condensing | |
| Certification | CE, FCC, RoHS, WEEE | |
